Menu Close

ICARSOFT

Showing 1–16 of 17 results

  • R1,599.00

    iCarsoft i820 OBDII/EOBD CAN Car Diagnostic Tool

    The iCarsoft i820 OBDII/EOBD CAN Car Diagnostic Tool is Equipped with the special I/M and Code readiness key, built-in speaker and TFT color display, i820 is much affordable but still of high quality and powerful in function. With i820, users can check emission monitor status, review repairs and solve basic problems on engine and driving performance.

    iCarsoft i820 OBDII/EOBD Auto Diagnostic Tool

    PRODUCT FEATURES

    1. Works with all 1996 and newer cars & light trucks that are OBDII compliant.
    2. Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turns off check engine light.
    3. Supports multiple trouble code requests: generic codes, pending codes, permanent codes and manufacturer’s specific codes.
    4. Reviews the emission readiness status of OBD monitors.
    5. Retrieves VIN (Vehicle Identification Number) on 2002 and newer vehicle that support Mode 9.
    6. Determines the malfunction indicator lamp (MIL) status.
    7. DTC Library. to lookup when operating this tool.
    8. O2 Sensor test results for most recently performed tests from the vehicle’s on-board computer.
    9. Reads the results of on-board diagnostic monitoring tests for specific components/systems.
    10. Evaporative System Test lets you initiate a leak test for the vehicle’s evaporative system.
    11. Saves and Reviews test results like I/M, Codes, Live Data and VIN.
    12. Uploads and Prints saved data to PC.
    13. Battery test shows the voltage of Data Link Connector(DLC), which is approximately the vehicle’s battery status.
    14. Easy to use with one plug-in; highly reliable and accurate.
    15. Easy to read crystal-clear backlit by display.
    16. Stand-alone unit with no need for an additional laptop computer to operate.
    17. Small in size and conveniently fits in your palm.
    18. Safely communicates with the on-board computer.
    19. No batteries needed-powered via detachable OBDII cable.

    iCarsoft i820 Product Features

    EIGHT SUPER ADVANTAGES.

    1. The Fastest Full Color, 2.8″ TFT 320*240 Pixels.
    2. Full Speed Upgrade via Computer.
    3. Support Multi-Language.
    4. Silicone Keys and Hot IM & Code Key for Easy Operation.
    5. Personal Operation Interface.
    6. Read & Clear DTC.
    7. Read Data Stream.
    8. Available in Red, Orange, Blue and Black.

    OBDII FUNCTION

    1. Read Codes
    2. Erase Codes
    3. I/M Readiness: I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. Data Stream.
    5. Freeze Frame:  When an emission related fault occurs certain vehicle conditions are recorded by the on board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test: This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle ‘ s on-board computer.
    7. On-Board Monitoring: This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test: The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the test system function. Refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information: The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors.
    12. Read live PCM data stream.
    13. Support CAN (Controller Area Network) and all other.
    14. Multilingual menu and DTC definitions: English, Spanish, and German, etc.
    15. Read pending DTCs.
    16. Read permanent DTCs.
    17. DTCs search.
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. Works on most 2001 and later OBDII compliant PETROL European vehicles.
    20. It Works on most 2004 and later OBDII compliant DIESEL European vehicles.
    21. Works on most 1996 and later OBDII compliant US and Asian vehicles.
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    iCarsoft i820 OBDII/EOBD Specifications

    1. Display: 2.8″ TFT LCD, 320*240 Pixels
    2. Operation Temperature: 0°C ~ 50°C
    3. Storage Temperature: -20°C ~ 70°C
    4. Operating Voltage: 9 ~ 18V
    5. Operating current: 150mA@12V(Typical)
    6. Power consumption: 1.8W(Typical)
    7. Dimension: 187.5*101*32 mm (L x W x H)
    8. Weight: <600g (GW)

    iCarsoft i820 OBDII/EOBD 2

    ICARSOFT i820 CONTENTS

    • iCarsoft i820 scantool (blue, orange, red or black)
    • OBDII cable.
    • Users Manual.
    • PC Connecting cable.
    • Nylon Carry Case.

    iCarsoft i820 Package

    R 612.95 x 3
  • R3,299.00

    iCarsoft LR V2.0 Diagnostic Tool for Land Rover / Jaguar 

    The iCarsoft LR V2.0 Diagnostic Tool for Land Rover / Jaguar is a PROFESSIONAL MULTI-SYSTEM CAR DIAGNOSTIC TOOL FOR LAND ROVER / JAGUAR + Oil Reset + EPB + BMS + DPF + SAS + ETC + BLD + INJ + OBDII.

    • iCarsoft LR V2.0 is a Professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc.
    • With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problem.

    ICarsoft LR V2.0 1

    iCarsoft LR V2.0 Diagnostic Tool Product Features.

    1. iCarsoft LR V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
    2. Support OBDII/EOBD Ten Modes of Operation.
    3. Read Live Data.
    4. Full ECU Diagnosis.
    5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC.
    6. Easy To Use With Silicone Keys.
    7. Oil Light/Service Reset: Support service lamp reset.
    8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
    9. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
    10. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator.
    11. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
    12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
    13. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
    14. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
    15. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
    16. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    17. DTC Library to lookup when user is operating this tool.
    18. Upgrade Via PC.
    19. Multi-language: English, German, Dutch, Spanish, French.

    EIGHTEEN
    super advantages

    Diagnose Single Brand of most Models (OBDII-16DLC)
    Full System Diagnosis Support Oil Service Reset.
    Electronic Parking Brake (EPB) system maintenance.
    Battery Management System (BMS)
    Diesel Particulate Filter (DPF) Regeneration Control System.
    Electronic Throttle Control System (ETC)
    Steering Angle Sensor (SAS) Calibration.
    ABS Bleeding(some vehicles do not enjoy this function)
    Injector Coding(some vehicles do not enjoy this function)
    Read &Clear DTC Read Live Data.
    Support Battery Test Support Data Review and Print.
    Full Speed Upgrade via PC 4.0″ TFT LCD, 480*320 Pixels.
    Support Multi-Language.

    OBDII function

    1. Read Codes.
    2. Erase Codes.
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating.
    4. properly and are ready for Inspection and Maintenance testing.
    5. Data stream.
    6. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    7. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    8. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    9. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    10. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
    11. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1,P3, and U1) codes and pending codes.
    12. Turn off Check Engine Light (MIL), clear cod-es and reset monitors.
    13. Read live PCM Data Stream.
    14. Support CAN (Controller Area Network) and all other.
    15. Multilingual menu and DTC definitions English, Spanish, and German, etc.
    16. Read pending DTCs.
    17. Read permanent DTCs.
    18. DTCs search.
    19. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    20. Works on most of 2001 and later OBDII compliant PETROL European vehicles.
    21. It Works on most of 2004 and later OBDII compliant DIESEL European vehicles.
    22. Works on most of 1996 and later OBDII compliant US and Asian vehicles.
    23. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    24. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    ICarsoft LR V2.0 OBDII Functions

    ICarsoft LR V2.0 Package

     

    R 1264.63 x 3
  • R3,299.00

    iCarsoft MB V2.0 Diagnostic Tool For Mercedes Benz / Sprinter & Smart Professional Multi-system Auto Diagnostic Tool 

    The iCarsoft MB V2.0 Diagnostic Tool Is a Professional Multi-system Auto Diagnostic Tool for Mercedes-Benz / Sprinter / Smart + Oil Reset + EPB + DPF + SAS + ETC + BLD + INJ + OBD II.

    ICARSOFT MB V2.0 1

    iCarsoft MB V2.0 is a Professional and powerful vehicle fault diagnosis tool for Mercedes-Benz / Sprinter / Smart developed by iCarsoft Technology Inc. With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

    Product Features

    1. iCarsoft MB V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
    2. Support OBDII/EOBD Ten Modes of Operation
    3. Read Live Data
    4. Full ECU Diagnosis
    5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
    6. Easy To Use With Silicone Keys
    7. Oil Light/Service Reset: Support service lamp reset.
    8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
    9. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
    10. Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replaces the throttle valve.
    11. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or re calibrates SAS while steering part replacement.
    12. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
    13. Injector coding, relearn the injector control parameter while the injector renewed or replaced
    14. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
    15. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    16. DTC Library to lookup when user is operating this tool.
    17. Upgrade Via PC
    18. Multi-language: English, German, Dutch, Spanish, French.

     

    ICARSOFT MB V2.0 2

    SEVENTEEN SUPER ADVANTAGES

    • ▪Diagnose Single Brand of most Models (OBDII-16DLC)
    • ▪Full System Diagnosis            ▪Support Oil Service Reset
    • ▪Electronic Parking Brake (EPB) system maintenance
    • ▪Diesel Particulate Filter (DPF) Regeneration Control System
    • ▪Electronic Throttle Control System (ETC)
    • ▪Steering Angle Sensor (SAS) Calibration
    • ▪ABS Bleeding(some vehicles do not enjoy this function)
    • ▪Injector Coding(some vehicles do not enjoy this function)
    • ▪Read &Clear DTC                      ▪Read Live Data
    • ▪Support Battery Test                 ▪Support Data Review and Print
    • ▪Full Speed Upgrade via PC       ▪4.0″ TFT LCD, 480*320 Pixels
    • ▪Support Multi-Language

    OBDII function

    1. Read Codes
    2. Erase Codes
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. Data stream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors.
    12. Read live PCM Data Stream.
    13. Support CAN (Controller Area Network) and all other.
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc.
    15. Read pending DTCs.
    16. Read permanent DTCs.
    17. DTCs search.
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. Works on most of 2001 and later OBDII compliant PETROL European vehicles.
    20. Support most of 2004 and later OBDII compliant DIESEL European vehicles.
    21. Works on most of 1996 and later OBDII compliant US and Asian vehicles.
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    ICARSOFT MB V2.0 DIAGNOSTIC TOOL Specifications:

    • Display: 4.0″ TFT LCD, 480*320 Pixels.
    • Operation Temperature: 0°C ~ 50°C.
    • Storage Temperature: -20°C ~ 70°C.
    • Operating Voltage: 9 ~ 18V
    • Operating Current: 150mA@12V (Typical)
    • Power Consumption: 1.8W (Typical)
    • Dimension: 206*104.1*32.6 mm (L x W x H)

    Contents:

    • MB V2.0 Main Unit
    • TF card (In the main unit)
    • Main Cable
    • Data Cable
    • User Manual

    ICARSOFT MB V2.0 3

    R 1264.63 x 3
  • R3,299.00

    ICARSOFT BMM DIAGNOSTIC TOOL V2.0 PROFESSIONAL MULTI SYSTEM

    The ICARSOFT BMM DIAGNOSTIC TOOL V2.0 PROFESSIONAL MULTI SYSTEM for BMW / MINI + OIL RESET + EPB + BMS + DPF + SAS+ ETC+BLD+INJ+ OBD II

    ICARSOFT BMM DIAGNOSTIC TOOl 1

    iCarsoft BMM V2.0 is a Professional and powerful vehicle fault diagnosis tool developed by iCarsoft Technology Inc.
    With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

    ICARSOFT BMM DIAGNOSTIC TOOl 2

    ICARSOFT BMM DIAGNOSTIC TOOl Product Features:

    1. iCarsoft BMM V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
    2. Support OBDII/EOBD Ten Modes of Operation
    3. Read Live Data
    4. Full ECU Diagnosis
    5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
    6. Easy To Use With Silicone Keys
    7. Oil Light/Service Reset: Support service lamp reset.
    8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
    9. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
    10. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator.
    11. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
    12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
    13. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
    14. Injector coding, relearn the injector control parameter while the injector renewed or replaced
    15. The Print Data function allows you printing out diagnostic data recorded by the scan
    16. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    17. DTC Library to lookup when user is operating this tool.
    18. Upgrade Via PC
    19. Multi-language: English, German, Dutch, Spanish, French.

    EIGHTEEN SUPER ADVANTAGES

    • ▪Diagnose Single Brand of most Models (OBDII-16DLC)
    • ▪Full System Diagnosis         ▪Support Oil Service Reset
    • ▪Electronic Parking Brake (EPB) system maintenance
    • ▪Battery Management System (BMS)
    • ▪Diesel Particulate Filter (DPF) Regeneration Control System
    • ▪Electronic Throttle Control System (ETC)
    • ▪Steering Angle Sensor (SAS) Calibration
    • ▪ABS Bleeding(some vehicles do not enjoy this function)
    • ▪Injector Coding(some vehicles do not enjoy this function)
    • ▪Read &Clear DTC                      ▪Read Live Data
    • ▪Support Battery Test                 ▪Support Data Review and Print
    • ▪Full Speed Upgrade via PC       ▪4.0″ TFT LCD, 480*320 Pixels
    • ▪Support Multi-Language.

    ICARSOFT BMM DIAGNOSTIC TOOl OBDII function:

    1. Read Codes
    2. Erase Codes.
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. Data stream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
    11. Turn off Check Engine Light (MIL), clear cod-es and reset monitors.
    12. Read live PCM Data Stream.
    13. Support CAN (Controller Area Network) and all other.
    14. Multilingual menu and DTC definitions English, Spanish, and German, etc.
    15. Read pending DTCs.
    16. Read permanent DTCs.
    17. DTCs search.
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. Works on most of 2001 and later OBDII compliant PETROL European vehicles.
    20. Support most of 2004 and later OBDII compliant DIESEL European vehicles.
    21. Works on most of 1996 and later OBDII compliant US and Asian vehicles.
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    Optional accessories

    • OBD-16 to BMW-20 Socket This socket is use to test the BMW vehicle between 1997 to 2000)
    • Note: The wiring diagram for the 20PIN adaptor must be the same with the  wiring diagram of the iCarsoft products’ port. Otherwise it may not be compatible with our products even when the apperance is the same. We suggest  that you purchase this adaptor from iCarsoft.

    ICARSOFT BMM DIAGNOSTIC TOOl 3

    Specifications

    • Display: 4.0″ TFT LCD, 480*320 Pixels
    • Operation Temperature: 0°C ~ 50°C
    • Storage Temperature: -20°C ~ 70°C
    • Operating Voltage: 9 ~ 18V
    • Operating Current: 150mA@12V(Typical)
    • Power Consumption: 1.8W (Typical)
    • Dimension: 206*104.1*32.6 mm (L x W x H)

     

    R 1264.63 x 3
  • R3,299.00

    iCARSOFT VAWS V2.0 FOR VW/AUDI/SKODA/SEAT + OIL RESET + EPB + BMS + DPF + SAS + ETC + INJ + OBDII

    iCarsoft VAWS V2.0 Diagnostic Tool is a Professional and powerful vehicle fault diagnosis tool for VW/Audi/Skoda/Seat developed by iCarsoft Technology Inc. With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

    iCARSOFT VAWS V2.0 Diagnostic Tool

    iCARSOFT VAWS V2.0 Diagnostic Tool Features

    iCARSOFT VAWS V2.0 DIAGNOSTIC TOOL PRODUCT FEATURES:

    1. iCarsoft VAWS V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
    2. Support OBDII/EOBD Ten Modes of Operation
    3. Read Live Data
    4. Full ECU Diagnosis
    5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
    6. Easy To Use With Silicone Keys
    7. Oil Light/Service Reset: Support service lamp reset.
    8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
    9. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
    10. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator.
    11. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
    12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or re calibrates SAS while steering part replacement.
    13. Injector coding, relearn the injector control parameter while the injector renewed or replaced
    14. The Print Data function allows you printing out diagnostic data recorded by the scan
    15. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    16. DTC Library to lookup when user is operating this tool.
    17. Upgrade Via PC
    18. Multi-language: English, German, Dutch, Spanish, French.

    iCARSOFT VAWS V2.0 Diagnostic Tool Seventeen Super Advantages

    OBDII FUNCTION:

    1. Read Codes
    2. Erase Codes
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. Data stream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors
    12. Read live PCM DataStream
    13. Support CAN (Controller Area Network) and all other
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
    15. Read pending DTCs
    16. Read permanent DTCs
    17. DTCs search
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
    20. Support most of 2004 and later OBDII compliant DIESEL European vehicles
    21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More

    iCARSOFT VAWS V2.0 Diagnostic Tool OBDII Functions

    iCARSOFT VAWS V2.0 Diagnostic Tool Specifications

    iCARSOFT VAWS V2.0 Diagnostic Tool Package

    R 1264.63 x 3
  • R3,299.00

    iCARSOFT OP V2.0 DIAGNOSTIC TOOL FOR OPEL / VAUXHALL +OIL RESET + EPB + DPF + SAS + ETC + OBDII

    iCarsoft OP V2.0 Diagnostic tool is a Professional and powerful vehicle fault diagnosis tool for Opel/Vauxhall developed by iCarsoft Technology Inc. With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

    iCARSOFT OP V2.0 DIAGNOSTIC TOOL

    iCARSOFT OP V2.0 DIAGNOSTIC TOOL PRODUCT FEATURES

    PRODUCT FEATURES

    1. iCarsoft OP V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
    2. Support OBDII/EOBD Ten Modes of Operation
    3. Read Live Data
    4. Full ECU Diagnosis
    5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
    6. Easy To Use With Silicone Keys
    7. Oil Light/Service Reset: Support service lamp reset.
    8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the  EPB system for replacement and initialization.
    9. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator.
    10. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
    11. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or re calibrates SAS while steering part replacement.
    12. The Print Data function allows you printing out diagnostic data recorded by the scan
    13. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    14. DTC Library to lookup when user is operating this tool.
    15. Upgrade Via PC
    16. Multi-language: English, German, Dutch, Spanish, French.

    iCARSOFT OP V2.0 DIAGNOSTIC TOOL FOURTEEN SUPER ADVANTAGES

    iCARSOFT OP V2.0 DIAGNOSTIC TOOL OBDII FUNCTIONS

    OBDII FUNCTION

    1. Read Codes
    2. Erase Codes
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. Data stream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors
    12. Read live PCM DataStream
    13. Support CAN (Controller Area Network) and all other
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
    15. Read pending DTCs
    16. Read permanent DTCs
    17. DTCs search
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
    20. Support most of 2004 and later OBDII compliant DIESEL European vehicles
    21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More

    iCARSOFT OP V2.0 DIAGNOSTIC TOOL SPECIFICATIONS

    iCARSOFT OP V2.0 DIAGNOSTIC TOOL PACKAGE

    R 1264.63 x 3
  • R3,299.00

    iCarsoft FA V2.0 Fiat/Alfa Romeo Professional Multi-System Car Diagnostic Tool

    iCarsoft FA V2.0 Fiat/Alfa Romeo is a Professional and powerful vehicle fault diagnosis tool for Fiat/Alfa Romeo developed by
    iCarsoft Technology Inc. With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of
    single vehicle brand and test modes mainly include: CANBUS,ISO9141, KWP2000, and J1850 etc.
    It enables technicians to accurately diagnose complex problems.

    For more ICarSoft products please follow the link: https://www.cardiagnosticsa.co.za/?s=icarsoft

    iCarsoft FA V2.0 for Fiat/Alfa Romeo Product Features:

    1. iCarsoft FA V2.0 can do it all-reads and clears trouble codes on most of the systems
      such as engine, transmission, ABS and airbag etc.
    2. Support OBDII/EOBD Ten Modes of Operation
    3. Read Live Data
    4. Full ECU Diagnosis
    5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
    6. Easy To Use With Silicone Keys
    7. Oil Light/Service Reset: Support service lamp reset.
    8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the
      EPB system for replacement and initialization.
    9. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration
      process while DPF blockage and turn off the DPF indicator.
    10. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or
      replaces the throttle valve.
    11. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to
      straight ahead, or re-calibrates SAS while steering part replacement.
    12. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
    13. Injector coding, relearn the injector control parameter while the injector renewed or replaced
    14. The Print Data function allows you printing out diagnostic data recorded by the scan
    15. Battery test allows you getting the voltage of battery with OBD port by the scan tool
      when the engine starts.
    16. DTC Library to lookup when user is operating this tool.
    17. Upgrade Via PC for free on official Icarsoft website: http://www.icarsofttech.uk
    18. Multi-language: English, German, Dutch, Spanish, French.

    OBDII Function list: 

    1. Read Codes
    2. Erase Codes
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly.
    4. Data stream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system.
    9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN),
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors.
    12. Also live PCM DataStream.
    13. Support CAN (Controller Area Network) and all other.
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc.
    15. With reading pending DTCs 16. Read permanent DTCs 17. DTCs search 18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    16. PETROL European vehicles OBDII COMPLIANT from 2001 to date.
    17. DIESEL European vehicles.
    18. US and Asian vehicles.
    19. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    20. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    Package list:

    • FA V2.0 Main Unit
    • TF card (In the main unit)
    • Main Cable
    • Data Cable
    • User Manual

     

    R 1264.63 x 3
  • R3,299.00

    iCarSoft KR V2.0 Kia / Hyundai / Daewoo Professional Multi-system Auto Diagnostic Tool for Kia / Hyundai / Daewoo with OIL RESET +EPB+DPF+SAS+ETC+BLD+INJ+OBDII

    iCarsoft KR V2.0 Kia / Hyundai / Daewoo is a Professional and powerful vehicle fault diagnosis tool for Kia/Hyundai/Daewoo developed by
    iCarsoft Technology Inc. With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of
    single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc.
    It enables technicians to accurately diagnose complex problems.

    For all other ICarSoft products please follow the link: https://www.cardiagnosticsa.co.za/?s=icarsoft

    iCarsoft KR V2.0 Kia / Hyundai / Daewoo 1

    Product Features:

    1. iCarsoft KR V2.0 can do it all-reads and clears trouble codes on most of the systems
      such as engine, transmission, ABS and airbag etc.
    2. Support OBDII/EOBD Ten Modes of Operation.
    3. Read Live Data.
    4. Full ECU Diagnosis.
    5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC.
    6. Easy To Use With Silicone Keys.
    7. Oil Light/Service Reset: Support service lamp reset.
    8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the
      EPB system for replacement and initialization.
    9. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration
      process while DPF blockage and turn off the DPF indicator.
    10. Throttle Control system (ETC) relearns the throttle value while clear or
      replaces the throttle valve.
    11. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to
      straight ahead, or re-calibrates SAS while steering part replacement.
    12. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
    13. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
    14. The Print Data function allows you printing out diagnostic data recorded by the scan.
    15. Battery test allows you getting the voltage of battery with OBD port by the scan tool
      when the engine starts.
    16. DTC Library to lookup when user is operating this tool.
    17. Upgrade Via PC on the official ICarSoft website: http://www.icarsofttech.uk
    18. Multi-language: English, German, Dutch, Spanish, French.

    iCarsoft KR V2.0 Kia / Hyundai / Daewoo 2

    Seventeen Super Advantages:

    ▪Diagnose Single Brand of most Models (OBDII-16DLC)

    ▪Full System Diagnosis       ▪Support Oil Service Reset

    ▪Electronic Parking Brake (EPB) system maintenance

    ▪Diesel Particulate Filter (DPF) Regeneration Control System

    ▪Throttle Control System (ETC)

    ▪Steering Angle Sensor (SAS) Calibration

    ▪ABS Bleeding(some vehicles do not enjoy this function)

    ▪Injector Coding(some vehicles do not enjoy this function)

    ▪Read &Clear DTC                  ▪Read Live Data

    ▪Support Battery Test              ▪Data Review and Print

    ▪Full Speed Upgrade via PC       ▪4.0″ TFT LCD, 480*320 Pixels

    ▪Multi-Language

     

    iCarSoft KR V2.0 for Kia / Hyundai / Daewoo OBDII Function list:

    1. Read Codes.
    2. Erase Codes.
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle.
    4. Data stream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system.
    9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN).
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors.
    12. Live PCM DataStream.
    13. Does CAN (Controller Area Network) and all other.
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc.
    15. Read pending DTCs.
    16. Permanent DTCs.
    17. DTCs search.
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. PETROL European vehicles.
    20. DIESEL European vehicles.
    21. US and Asian vehicles.
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    iCarsoft KR V2.0 Kia / Hyundai / Daewoo 3

    iCarSoft KR V2.0 for Kia / Hyundai / Daewoo Package Contents:

    • KR V2.0 Main Unit
    • TF card (In the main unit)
    • Main Cable
    • Data Cable
    • User Manual

    iCarsoft KR V2.0 Kia / Hyundai / Daewoo

    R 1264.63 x 3
  • R3,499.00

    iCarsoft JP V2.0 Professional Multi-system Car Diagnostic Tool

    The iCarsoft JP V2.0 Professional Multi-system Car Diagnostic Tool for Toyota, Lexus, Scion, Isuzu, Nissan(Infiniti), Mitsubishi, Honda(Acura) Mazda, Subaru + Oil Reset + EPB + BMS + DPF + SAS + ETC + BLD + INJ + OBDII.

    iCarsoft JP V2.0 1

    iCarsoft JP V2.0 is a Professional and powerful vehicle fault diagnosis tool for Japanese vehicles developed by iCarsoft Technology Inc. With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

    Product Features

    1. iCarsoft JP V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
    2. Support OBDII/EOBD Ten Modes of Operation
    3. Read Live Data
    4. Full ECU Diagnosis
    5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
    6. Easy To Use With Silicone Keys
    7. Oil Light/Service Reset: Support service lamp reset.
    8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
    9. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
    10. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regen-eration process while DPF blockage and turn off the DPF indicator.
    11. Electronic Throttle Control system (ETC) relearns the throttle va value while clear or replaces the throttle valve.
    12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
    13. ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
    14. Injector coding, relearn the injector control parameter while the injector renewed or replaced
    15. The Print Data function allows you printing out diagnostic data recorded by the scan
    16. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    17. DTC Library to lookup when user is operating this tool.
    18. Upgrade Via PC
    19. Multi-language: English, German, Dutch, Spanish, French.

    SEVENTEEN SUPER ADVANTAGES

    • ▪Diagnose Single Brand of most Models (OBDII-16DLC)
    • ▪Full System Diagnosis          ▪Support Oil Service Reset
    • ▪Electronic Parking Brake (EPB) system maintenance
    • ▪Battery Management System (BMS)
    • ▪Diesel Particulate Filter (DPF) Regeneration Control System
    • ▪Electronic Throttle Control System (ETC)
    • ▪Steering Angle Sensor (SAS) Calibration
    • ▪ABS Bleeding(some vehicles do not enjoy this function)
    • ▪Injector Coding(some vehicles do not enjoy this function)
    • ▪Read &Clear DTC                      ▪Read Live Data
    • ▪Support Battery Test                 ▪Support Data Review and Print
    • ▪Full Speed Upgrade via PC       ▪4.0″ TFT LCD, 480*320 Pixels
    • ▪Support Multi-Language

    iCarsoft JP V2.0 2

    iCarsoft JP V2.0 OBDII function

    1. Read Codes
    2. Erase Codes.
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. Data stream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors.
    12. Read live PCM Data Stream.
    13. Support CAN (Controller Area Network) and all other.
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc.
    15. Read pending DTCs.
    16. Read permanent DTCs.
    17. DTCs search.
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. Works on most of 2001 and later OBDII compliant PETROL European vehicles.
    20. Support most of 2004 and later OBDII compliant DIESEL European vehicles.
    21. Works on most of 1996 and later OBDII compliant US and Asian vehicles.
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    iCarsoft JP V2.0 Specifications

    • Display: 4.0″ TFT LCD, 480*320 Pixels.
    • Operation Temperature: 0°C ~ 50°C.
    • Storage Temperature: -20°C ~ 70°C.
    • Operating Voltage: 9 ~ 18V.
    • Operating Current: 150mA@12V (Typical)
    • Power Consumption: 1.8W (Typical)
    • Dimension: 206*104.1*32.6 mm (L x W x H)

    Contents:

    • JP V2.0 Main Unit
    • TF card (In the main unit)
    • Main Cable
    • Data Cable
    • User Manual

    iCarsoft JP V2.0 Package

    R 1341.29 x 3
  • R3,499.00

    ICARSOFT US DIAGNOSTIC TOOL V2.0 FOR (US FORD, EU FORD AND AU FORD) GM / CHRYSLER / JEEP / HOLDEN + OIL RESET + EPB + BMS + DPF + SAS + ETC + OBDII

    The iCarsoft US Diagnostic Tool V2.0 is a Professional and powerful vehicle fault diagnosis tool for Ford/ GM/ Holden developed by iCarsoft Technology Inc. With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

    iCARSOFT US DIAGNOSTIC TOOL

    PRODUCT FEATURES:

    1. iCarsoft US V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
    2. Support OBDII/EOBD Ten Modes of Operation
    3. Read Live Data
    4. Full ECU Diagnosis
    5. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
    6. Easy To Use With Silicone Keys.
    7. Oil Light/Service Reset: Support service lamp reset.
    8. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
    9. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
    10. Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
    11. Electronic Throttle Control systems (ETC) relearn the throttle valve control value while clear or replace the throttle valve.
    12. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead or recalibrates SAS while steering part replacement.
    13. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
    14. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    15. DTC Library to lookup when user is operating this tool.
    16. Upgrade via PC.
    17. Multi-language: English, German, Dutch, Spanish, French

    iCARSOFT US DIAGNOSTIC TOOL PRODUCT FEATURES

    SUPER ADVANTAGES:

    1. Diagnose Single Brand of most Models (OBDII-16DLC)
    2. Full System Diagnosis
    3. Support Oil Service Reset
    4. Electronic Parking Brake (EPB) system maintenance
    5. Battery Management System (BMS)
    6. Diesel Particulate Filter (DPF) Regeneration Control System
    7. Electronic Throttle Control System (ETC)
    8. Steering Angle Sensor (SAS) Calibration
    9. Read & Clear DTC
    10. Read Live Date
    11. Support Battery Test
    12. Support Data Review and Print
    13. Full Speed Upgrade via PC
    14. 4.0″ TFT LCD, 480*320 Pixels
    15. Support Multi-Language


    OBDII FUNCTION:

    1. Read Codes
    2. Erase Codes
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. Data stream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors
    12. Read live PCM Data Stream
    13. Support CAN (Controller Area Network) and all other
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
    15. Read pending DTCs
    16. Read permanent DTCs
    17. DTCs search
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. Works on most of 2001 and later OBDII compliant PETROL European vehicles.
    20. Support most of 2004 and later OBDII compliant DIESEL European vehicles.
    21. Works on most of 1996 and later OBDII compliant US and Asian vehicles.
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More

    iCARSOFT US DIAGNOSTIC TOOL OBDII FUNCTIONS

    iCARSOFT US DIAGNOSTIC TOOL Contents:

    • US V2.0 (1+4) Main Unit
    • TF card (In the main unit)
    • Main Cable
    • Data Cable
    • User Manual

    iCARSOFT US DIAGNOSTIC TOOL CONTENTS

    R 1341.29 x 3
  • R3,999.00

    ICarsoft HD V3.0 Heavy Duty & OBDII Diagnostic Tool 2 In 1

    The ICarsoft HD V3.0 Heavy Duty & OBDII Diagnostic Tool Is A Professional And Powerful Truck Fault Diagnostic Tool Developed By ICarsoft Technology Inc. With 2.8” Tft Lcd And Unique Diagnostic Software Of Trucks In Compliance With Standard Protocols(J1587, J1939 And J1708), It Has 10 Modes Of OBD / EOBD Can Tests For A Complete Diagnosis, And Also Support 6pin & 9pin Adapter For Some Special Trucks.

    ALL ICARSOFT PRODUCTS LINK: https://www.cardiagnosticsa.co.za/brand/icarsoft/

    ICarsoft HD V3.0 heavy duty and OBDII DIAGNOSTIC

    Product Features:

    1. Support All Heavy-Duty Trucks In Compliance With Standard Protocols (J1587, J1939 And J1708).
    2. Work On Most Cars, Mini Vans And Light Duty Vehicles (OBDII & CAN) From 1996 On – European, American And Asian.
    3. Support All OBDII Protocols: CAN, J1850 PWM, J1850 VPW, ISO9141 And KWP2000.
    4. Uniquely Featured With Battery Power Monitor Function.
    5. Troubleshooting Tips Guide Technicians To The Root Of Problems Faster, Saving Diagnosis And Repair Time.
    6. Read And Erase Generic Codes (P0, P2, P3 And U0), Manufacturer Specific Codes (P1, P3 And U1) And Pending Codes.
    7. Easily Determine The Cause Of The Check Engine Light (MIL) And Turn Off Check Engine Light (MIL), Clear Troubles Codes And Reset Monitors.
    8. Display DTC Definition, Freeze Frame Data, Monitor And I/M Readiness Status (Emissions) And Vehicle Information (VIN, CIN And CVN)
    9. Read Live O2 Sensor Test Data.
    10. Read PCM Live Data Stream With Graphic Data Display.
    11. Enhanced OBDII Mode 6.
    12. Battery Test: Checking The Battery Voltage Via OBD Port With The Scanner.
    13. Multilingual Menu And DTC Definitions: English, German, Dutch, Spanish And French.
    14. Software Upgrade Via Computer From Official Website: Https://Www.Icarsoft.Com/

    ICarsoft HD V3.0 OBDII Functions:

    1. Read Codes.
    2. Erase Codes.
    3. I/M Readiness: I/M Readiness Indicate Whether Or Not The Various Emissions-Related Systems On The Vehicle Are Operating Properly And Are Ready For Inspection And Maintenance Testing.
    4. DataStream.
    5. Freeze Frame: Emission-Related Fault Occurs, Certain Vehicle Conditions Are Recorded By The On-Board Computer. This Information Is Referred To As Freeze Frame Data. Freeze Data Is A Snapshot Of The Operating Conditions At The Time Of An Emission-Related Fault.
    6. O2 Sensor Test: This Option Allows Retrieval And Viewing Of O2 Sensor Test Results For Most Recently Performed Tests From The Vehicle’s On-Board Computer.
    7. On-Board Monitoring: This Function Can Be Utilized To Read The Results Of On-Board Diagnostic Monitoring Tests For Specific Components/Systems.
    8. Evap System Test: The EVAP Test Function Lets You Initiate A Leak Test For The Vehicle’s EVAP System.
    9. Vehicle Information: The Option Displays The Vehicle Identification Number (VIN),The Calibration Verification Number (CVN), And Other Information Of The Test Vehicle.
    10. Retrieve Generic (P0, P2, P3, And U0), Manufacturer Specific (P1, P3, And U1) Codes And Pending Codes.
    11. Turn Off Check Engine Light (MIL), Clear Codes And Reset Monitors.
    12. Read Live PCM DataStream.
    13. Support CAN (Controller Area Network) And All Other.
    14. Multilingual Menu And DTC Definitions- English, Spanish, And German, Etc.
    15. Read Pending DTCs.
    16. Read Permanent DTCs.
    17. DTCs Search.
    18. Supports Most Of The OBDII/EOBD Test Modes Include: CAN, ISO9141, KWP2000, J1850 VPW And J1850 PWM.
    19. Works On Most Of 2001 And Newer OBDII Compliant PETROL European Vehicles.
    20. Support On Most Of 2004 And Newer OBDII Compliant DIESEL European Vehicles.
    21. Works On Most Of 1996 And Newer OBDII Compliant US And Asian Vehicles.
    22. View & Graph Live Data In Color Graphing And Blazing Fast Refresh Rate For Better Graphing And Live Data Readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    ICarsoft HD V3.0 vehicle list

    Specifications:

    • Display: 2.8” TFT LCD, 320*240 Pixels.
    • Operating Current: 150mA@12V (Typical)
    • Operating Temperature: 0°C~50°C.
    • Power Consumption: 1.8W (Typical)
    • Storage Temperature: -20°C ~70°C.
    • Dimension: 142*90*222.5 Mm (L X W X H)
    • Operating Voltage: 9 ~ 28V.

    ICarsoft HD V3.0 Contents:

    • Main Unit.
    • 6 Pin & 9 Pin Adaptor.
    • PC Connecting Cable.
    • Nylon Carry Case.
    • Packing.

     

    R 1532.95 x 3
  • R4,399.00

    ICarsoft CR Plus Professional Diagnostic Tool

    The ICarsoft CR Plus Is A Well-Built Comprehensive Diagnosis Instrument By ICarsoft. It’s Not Only Including Full Function Of OBDII/EOBD, But Also Support More Function Of Four System( Engine, Automatic Transmission, Anti-Lock Braking System And Airbag ) Of Certain Models Of Car, Such As Read And Clear Code, Multi Languages, Data Flow Picture Display, Graph. It Also Includes Electronic Parking Brake (EPB) Release, Steering Angle Sensor (SAS) And Oil Service Light Resets. View Engine, ABS, SRS Along With A/T Enhanced Data

    ALL ICARSOFT PRODUCTS LINK: https://www.cardiagnosticsa.co.za/?s=ICARSOFT

    ICARSOFT CR PLUS D1

    CR PLUS vehicle coverage:

    ICARSOFT CR PLUS D2

    1. ① OBD–Connects the iCarsoft Serial products/ CR Plus to the vehicle’s Data Link Connector(DLC) via the diagnostic cable.
    2. ② Button–Move cursor up and down for selection. Button–Move cursor right or left for selection. Or turn page up and down when more than one page is displayed.
    3. ③ OK Button–Confirms a selection(or action)from a menu list.
    4. ④ ESC Button–Exit the current program or return to the previous screen.
    5. ⑤ Button–To retrieve the DTCs in tthe database.
    6. ⑥ LCD Display–Indicates test results.
    7. ⑦ USB Port–To connect on PC to upload data or print test results.
    8. ⑧ TF card slot–Insert the TF card into it to update your tool.

    ICARSOFT CR PLUS D3

    Product Features

    • OBDII diagnostic full function.
    • Multiple car models (covering over 40 prevailing models from Asia, America and Europe).
    • Support 4 Systems: Engine, Transmission, ABS, and Airbag.
    • Basic diagnostic functions: read DTCs, clear DTCs, and read data stream.
    • Support DTCs help, data stream wave display, history data record and replay.
    • Online upgrade, you can download the latest version anytime anywhere.
    • Auto module search.
    • Enhanced OBDII Mode 6.
    • Supports vehicles 1996 & newer ( OBDII & CAN )
    • Retrieves generic P0, P2, P3 & U0 codes, along with manufacturer specific P1, P3 & U1 codes – both permanent & pending.
    • Read & Clear Check Engine Lights.
    • Turn off MIL & reset monitors.
    • Displays DTC definitions right on the screen.
    • View freeze frame data & I/M Readiness monitor status.
    • Display live PCM data stream & O2 Sensor test data.
    • Graph, record & replay data in full color.
    • Resets Oil Service Light.
    • Brake Pads Reset.
    • Steering Angle Sensor Calibration.
    • Code cause / solution tips guide users to the root cause of trouble codes faster, saving diagnosis and repair time.
    • Retrieves vehicle information ( VIN, CIN and CVN )

    ICARSOFT CR PLUS D4

    Twelve super advantages

    1. Read & Clear DTCs.
    2. Read Data Stream.
    3. Full ECU Diagnosis.
    4. Diagnose Multi-brand Models Equipped With OBDII-16 DLC.
    5. Easy To Use With Metal Dome Keys.
    6. Oil Light/Service Reset.
    7. Brake Pads Reset.
    8. Steering Angle Sensor Calibration.
    9. 4.0″ TFT LCD with 480 * 320 Pixels.
    10. Hi speed update via PC.
    11. Upgrade via TF Card.
    12. Support Multi-language and for more, refer to User’s Manual.

    ICARSOFT CR PLUS D5

    OBDII FUNCTIONS:

    1. Read Codes.
    2. Erase Codes.
    3. I/M Readiness: I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. Data Stream.
    5. Freeze Frame: When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test: This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring: This function can be utilized to read the results of on-board diagnostic monitoring  tests for specific components/systems.
    8. Evap System Test: The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information: The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.

    ICARSOFT CR PLUS D6

    Specifications

    • Display: 4.0″ TFT LCD , with 480 * 320 Pixels.
    • Operation Temperature: 0℃ — 50℃.
    • Storage Temperature: -20 ℃ — 70 ℃.
    • Power: 9V – 18V.
    • Operating current: 150mA@12V(Typical).
    • Power consumption: 1.8W(Typical).
    • Dimension: 205mm*110mm*31mm(L x W x H).
    • Weight: 350g

    ICARSOFT CR PLUS D7

    R 1686.29 x 3
  • R4,399.00

    ICarsoft CR V2.0(1+4) Multi-Brand Vehicle Diagnostic Tool With 5 Vehicle Brands Choice For Multi-Brand Vehicles + Oil Reset + EPB + BMS + DPF + SAS + ETC + BLD + INJ + OBDII

    The ICarsoft CR V2.0 1+4 Is A Professional And Powerful Vehicle Fault Diagnosis Tool For Multi-Brand Vehicles (5 Vehicle Choices, Please Note That Once You Downloaded A Certain Software, You Cannot Change To Another One, So Please Make Sure Of The Exact Software That You Need Before You Install To The Scanner.) Developed By ICarsoft Technology Inc. With A 4.0″ TFT LCD And Unique Diagnostic Software, It Features Full ECU Diagnosis Of Single Vehicle Brand And Test Modes Mainly Include: CANBUS, ISO9141, KWP2000, And J1850 Etc. It Enables Technicians To Accurately Diagnose Complex Problems.

    NOTE: YOU CAN CHOOSE ANY 5 VEHICLE BRANDS

    ALL ICARSOFT PRODUCTS: https://www.cardiagnosticsa.co.za/?s=ICARSOFT

    iCARSOFT CR V2.0 1+4 MULTI-BRAND 1

    iCARSOFT CR V2.0 1+4 PRODUCT FEATURES

    Product Features:

    1. ICarsoft CR V2.0(1+4) Can Do It All-Reads And Clears Trouble Codes On Most Of The Systems Such As Engine, Transmission, ABS And Airbag Etc.
    2. Support OBDII/EOBD Ten Modes Of Operation
    3. Read Live Data
    4. Full ECU Diagnosis
    5. Applies To The Single Brand Of Most Of The Models Which Equipped With OBDII-16 DLC
    6. Easy To Use With Silicone Keys
    7. Oil Light/Service Reset: Support Service Lamp Reset.
    8. Electronic Parking Brake (EPB) System Maintenance Deactivates And Reactivates The EPB System For Replacement And Initialization.
    9. Battery Management System (BMS), Registers New Battery To The BMS While Battery Replacement.
    10. Diesel Particulate Filter (DPF) Regeneration Control System, Requests The DPF Regen-Eration Process While DPF Blockage And Turn Off The DPF Indicator.
    11. Electronic Throttle Control System (ETC) Relearns The Throttle Va Value While Clear Or Replaces The Throttle Valve.
    12. SAS: Steering Angle Sensor (SAS) Calibration, Calibrates The Steering Wheel To Straight Ahead, Or Re-Calibrates SAS While Steering Part Replacement.
    13. ABS Bleeding, Release The Air To Restore ABS Brake Sensitivity, Or Relearn While ABS Replaced.
    14. Injector Coding, Relearn The Injector Control Parameter While The Injector Renewed Or Replaced
    15. The Print Data Function Allows You Printing Out Diagnostic Data Recorded By The Scan
    16. Battery Test Allows You Getting The Voltage Of Battery With OBD Port By The Scan Tool When The Engine Starts.
    17. DTC Library To Lookup When User Is Operating This Tool.
    18. Upgrade Via PC
    19. Update Via Official Website: Https://Www.Icarsoft.Com/
    20. Multi-Language: English, German, Dutch, Spanish, French.

    iCARSOFT CR V2.0 1+4 SEVENTEEN SUPER ADVANTAGES

    iCARSOFT CR V2.0 1+4 OBDII FUNCTIONS

    ICarsoft CR V2.0 1+4 OBDII Functions:

    1. Read Codes.
    2. Erase Codes.
    3. I/M Readiness: I/M Readiness Indicate Whether Or Not The Various Emissions-Related Systems On The Vehicle Are Operating Properly And Are Ready For Inspection And Maintenance Testing.
    4. Data Stream.
    5. Freeze Frame: When An Emission-Related Fault Occurs, Certain Vehicle Conditions Are Recorded By The On-Board Computer. This Information Is Referred To As Freeze Frame Data. Freeze Data Is A Snapshot Of The Operating Conditions At The Time Of An Emission-Related Fault.
    6. O2 Sensor Test: This Option Allows Retrieval And Viewing Of O2 Sensor Test Results For Most Recently Performed Tests From The Vehicle’s On-Board Computer.
    7. On-Board Monitoring: This Function Can Be Utilized To Read The Results Of On-Board Diagnostic Monitoring Tests For Specific Components/Systems.
    8. Evap System Test: The EVAP Test Function Lets You Initiate A Leak Test For The Vehicle’s EVAP System. Before Using The System Test Function, Refer To The Vehicle’s Service Repair Manual To Determine The Procedures Necessary To Stop The Test.
    9. Vehicle Information: The Option Displays The Vehicle Identification Number (VIN), The Calibration Verification Number (CVN), And Other Information Of The Test Vehicle.
    10. Retrieve Generic (P0, P2, P3, And U0), Manufacturer Specific (P1, P3, And U1) Codes And Pending Codes.
    11. Turn Off Check Engine Light (MIL), Clear Codes And Reset Monitors.
    12. Read Live PCM Data Stream.
    13. Support CAN (Controller Area Network) And All Other.
    14. Multilingual Menu And DTC Definitions- English, Spanish, And German, Etc.
    15. Read Pending DTCs.
    16. Read Permanent DTCs.
    17. DTCs Search.
    18. Supports Most Of The OBDII/EOBD Test Modes Include: CAN, ISO9141, KWP2000, J1850 VPW And J1850 PWM.
    19. Works On Most Of 2001 And Later OBDII Compliant PETROL European Vehicles.
    20. Support Most Of 2004 And Later OBDII Compliant DIESEL European Vehicles.
    21. Works On Most Of 1996 And Later OBDII Compliant US And Asian Vehicles.
    22. View & Graph Live Data In Color Graphing And Blazing Fast Refresh Rate For Better Graphing And Live Data Readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    iCARSOFT CR V2.0 1+4

    iCARSOFT CR V2.0 1+4 SPECIFICATIONS

    iCARSOFT CR V2.0 1+4 Contents

    R 1686.29 x 3
  • R4,799.00

    ICARSOFT CR ELITE MULTI-SYSTEM PROFESSIONAL DIAGNOSTIC TOOL

    The Icarsoft Cr Elite Multi-System Professional Diagnostic Tool For Multi-Brand Vehicles Four Systems. All Vehicle Makes. All Powerful. More Special Functions.More Performance.

    Icarsoft Cr Elite D1

    iCarsoft CR Elite is a Professional and powerful vehicle fault diagnosis tool for multi-brand vehicles (more than 40 kinds of vehicle makes) developed by iCarsoft Technology Inc. With a 4.0″ TFT LCD and unique diagnostic software, it features full ECU diagnosis of most vehicle brands and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

    CR Elite vehicle coverage:

    Nissan, Infiniti, Toyota, Lexus, Scion, Honda, Isuzu, Hyundai, Kia, Daewoo, Mazda, US Ford, Sprinter, BMW, Mini, VW, Seat, Skoda, Volvo, Porsche, SAAB, EU Ford, Holden, AUS Ford, Acura, Subaru, Mitsubishi, Dacia, Renault, Fiat, GM, Chrysler, Mercedes-Benz, Citroen, Jaguar, Peugeot, Audi, Opel, Land Rover, Smart, Suzuki, Vauxhall, Alfa-Romeo, Lancia.

    Icarsoft Cr Elite D2

    Icarsoft Cr Elite D3

    Icarsoft Cr Elite Features & Benefits

    • iCarsoft CR Elite can do it all-reads and clears trouble codes on the four systems such as engine, transmission, ABS and Airbag.
    • Support OBDII/EOBD Ten Modes of Operation.
    • Read Live Data.
    • Full ECU Diagnosis.
    • Applies to most of the vehicle models which equipped with OBDII-16 DLC.
    • Easy To Use with Silicone Keys.
    • Oil Light/Service Reset: Support service lamp reset.
    • Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
    • Battery Management System (BMS), registers new battery to the BMS while battery replacement.
    • Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
    • Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replaces the throttle valve.
    • Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates
    • ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
    • Injector coding, relearn the injector control parameter while the injector renewed or replaced SAS while steering part replacement.
    • The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
    • Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    • DTC Library to lookup when user is operating this tool.
    • Upgrade via PC.
    • Multi-language: English, German, Dutch, Spanish, French.

    Note:

    • Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
    • This scan tool covers over 20 years of models, so some functions may not be available on all years/models.

    Icarsoft Cr Elite D4

    EIGHTEEN SUPER ADVANTAGES

    • Diagnose Single Brand of most Models (OBDII-16DLC)
    • Four System Diagnosis
    • Support Oil Service Reset
    • Electronic Parking Brake (EPB) system maintenance
    • Battery Management System (BMS)
    • Diesel Particulate Filter (DPF) Regeneration Control System
    • Electronic Throttle Control System (ETC)
    • Steering Angle Sensor (SAS) Calibration
    • ABS Bleeding(some vehicles do not enjoy this function)
    • Injector Coding(some vehicles do not enjoy this function)
    • Read &Clear DTC
    • Read Live Data
    • Support Battery Test
    • Support Data Review and Print
    • Full Speed Upgrade via PC
    • 4.0″ TFT LCD, 480*320 Pixels
    • Support Multi-Language

    Icarsoft Cr Elite D5

    Icarsoft Cr Elite FUNCTION

    1. Read Codes.
    2. Erase Codes.
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. DataStream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information — The option displays the vehicle identification number (VIN),the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors.
    12. Read live PCM DataStream.
    13. Support CAN (Controller Area Network) and all other
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc.
    15. Read pending DTCs.
    16. Read permanent DTCs.
    17. DTCs search.
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. Works on most of 2001 and later OBDII compliant PETROL European vehicles.
    20. Do Works on most of 2004 and later OBDII compliant DIESEL European vehicles.
    21. Works on most of 1996 and later OBDII compliant US and Asian vehicles.
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

    Icarsoft Cr Elite D6

    SPECIFICATIONS

    • Display: 4.0″ TFT LCD, 480*320 Pixels
    • Operation Temperature: 0°C ~ 50°C
    • Storage Temperature: -20°C ~ 70°C
    • Operating Voltage: 9 ~ 18V
    • Operating Current: 150mA@12V (Typical)
    • Power Consumption: 1.8W (Typical)
    • Dimension: 206*104.1*32.6 mm (L x W x H)

    Contents:

    • Main Unit
    • Hardcopy User’s Manual
    • Main cable
    • Data cable
    • TF Card (Within the main unit)
    • Nylon carry case

    Icarsoft Cr Elite D7

    R 1839.63 x 3
  • R5,399.00

    iCarsoft CR Pro Multi-System Professional Diagnostic Tool

    The iCarsoft CR Pro Multi-System Professional Diagnostic Tool for Multi-brand Vehicles All Systems. All Vehicle Makes is a Powerful with More Special Functions, More Performance and More Pro

    iCarsoft CR Pro D1

    • iCarsoft CR Pro Multi-System is a Professional and powerful vehicle fault diagnosis tool for multi-brand vehicles (more than 40 kinds of vehicle makes) developed by iCarsoft Technology Inc.
    • With a 4.0” TFT LCD and unique diagnostic software, it features full ECU diagnosis of most vehicle brands and test modes mainly include:
    • CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.

    iCarsoft CR Pro Multi-System vehicle coverage:

    Nissan, Infiniti, Toyota, Lexus, Scion, Honda, Isuzu, Hyundai, Kia,Daewoo, Mazda, US Ford, Sprinter, BMW, Mini, VW, Seat, Skoda, Volvo, Porsche, SAAB, EU Ford, Holden, AUS Ford, Acura, Subaru, Mitsubishi, Dacia, Renault, Fiat, GM, Chrysler, Mercedes-Benz, Citroen, Jaguar, Peugeot, Audi, Opel, Land Rover, Smart, Suzuki, Vauxhall, Alfa-Romeo, Lancia.

    iCarsoft CR Pro D2

    iCarsoft CR Pro Multi-System Features & Benefits

    • iCarsoft CR Pro can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and Airbag etc.
    • Support OBDII/EOBD Ten Modes of Operation.
    • Read Live Data.
    • Full ECU Diagnosis.
    • Applies to most of the vehicle models which equipped with OBDII-16 DLC.
    • Easy To Use with Silicone Keys.
    • Oil Light/Service Reset: Support service lamp reset.
    • Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.
    • Battery Management System (BMS), registers new battery to the BMS while battery replacement.
    • Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
    • Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or replaces the throttle valve.
    • Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or re calibrates
    • ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
    • Injector coding, relearn the injector control parameter while the injector renewed or replaced SAS while steering part replacement.
    • The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
    • Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    • DTC Library to lookup when user is operating this tool.
    • Upgrade via PC.
    • Multi-language: English, German, Dutch, Spanish, French.

    Note:

    • Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
    • This scan tool covers over 20 years of models, so some functions may not be available on all years/models.

    EIGHTEEN SUPER ADVANTAGES

    • Diagnose Single Brand of most Models (OBDII-16DLC)
    • Full System Diagnosis ▪Support Oil Service Reset
    • Electronic Parking Brake (EPB) system maintenance
    • Battery Management System (BMS)
    • Diesel Particulate Filter (DPF) Regeneration Control System
    • Electronic Throttle Control System (ETC)
    • Steering Angle Sensor (SAS) Calibration.
    • ABS Bleeding(some vehicles do not enjoy this function)
    • Injector Coding(some vehicles do not enjoy this function)
    • Read &Clear DTC
    • Read Live Data
    • Support Battery Test
    • Support Data Review and Print
    • Full Speed Upgrade via PC
    • 4.0″ TFT LCD, 480*320 Pixels
    • Support Multi-Language

    OBDII function

    1. Read Codes
    2. Erase Codes
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. DataStream
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information — The option displays the vehicle identification number (VIN),the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors
    12. Read live PCM DataStream
    13. Support CAN (Controller Area Network) and all other
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc.
    15. Read pending DTCs
    16. Read permanent DTCs
    17.  DTCs search
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
    20. Will Works on most of 2004 and later OBDII compliant DIESEL European vehicles
    21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More

    Specifications

    • Display: 4.0″ TFT LCD, 480*320 Pixels
    • Operation Temperature: 0°C ~ 50°C
    • Storage Temperature: -20°C ~ 70°C
    • Operating Voltage: 9 ~ 18V
    • Operating Current: 150mA@12V (Typical)
    • Power Consumption: 1.8W (Typical)
    • Dimension: 206*104.1*32.6 mm (L x W x H)

    Contents:

    • Main Unit
    • Hardcopy User’s Manual
    • Main cable
    • Data cable
    • TF Card (Within the main unit)
    • Nylon carry case

    R 2069.63 x 3
  • R7,399.00

    ICARSOFT CR MAX DIAGNOSIS TOOL WITH SUPERIOR SPECIAL FUNCTIONS 

    The iCarsoft CR MAX 2021 offers EXCLUSIVE FULL SYSTEM Coverage for over 56 American, Asian and European Vehicle Manufacturers. Avoiding costly visits to a dealership when you can diagnose, report and clear troublesome fault codes within minutes.

    Offering detailed descriptions and likely reasons as to why your vehicle is showing Engine, Auto Transmission, ABS, Airbag and more Diagnostic Trouble Codes (DTC’s) and the ability to remove and clear them. This is the solution at amazing value for money – enabling technicians to accurately diagnose complex problems and now enables you to easily do the same.

    ALL ICARSOFT PRODUCTS LINK: https://www.cardiagnosticsa.co.za/brand/icarsoft/

    ICARSOFT CR MAX

    ICARSOFT CR MAX SUPER ADVANTAGES:

    1. Comprehensive OBD relearn coverage.
    2. Onscreen relearn procedure.
    3. Read &Clear codes for all available systems.
    4. Display live data in text, graph & analog for easy data review.
    5. Can Record the vehicle Texts History and Identity the vehicle information automatically. Also, to keep the live data information.
    6. Support OBDII/EOBD Ten Modes of Operation.
    7. Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC.
    8. Easy To Use with Silicone Keys.
    9. DTC Library to lookup when user is operating this tool.
    10. Support Freeze Frame of Fault Code functions.
    11. Automatic software upgrade. Free service for life time.
    12. Easy to feedback test questions online.
    13. Provides convenient instruction with customer in interface.
    14. Multiple languages for option: English, German, Dutch, Spanish, French, Polish Italian Russian Portuguese Hungarian Czech Swedish Norwegian Finnish Danish. (More languages will be added in the future.)
    15. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
    16. The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
    17. Auto VIN technology can automatically identify model and year information in no time.
    18. Actuation Test / Bidirectory Test is used to access vehicle-specific subsystem and component tests.
    19. Software Upgrade Via Computer From Official Website: http://Https://Www.Icarsoft.Com/

    ICARSOFT CR MAX(SERVICE) RESET FUNCTIONS:

    1. Oil Light/Service Reset: Support service lamp/ service interval reset.
    2. EPB (Electronic Parking Brake) system: maintenance deactivates and reactivates the EPB system for replacement and initialization.
    3. DPF (Diesel Particulate Filter) Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
    4. ETC (Electronic Throttle Control) system relearns the throttle valve control value while clear or replace the throttle valve.
    5. SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
    6. BMS (Battery Management System), registers new battery to the BMS while battery replacement.
    7. ABS Bleeding: release the air to restore ABS Brake sensitivity, or relearn while ABS replaced.
    8. Injectors Coding: relearn the injector control parameter while the injectors renewed or replaced.
    9. TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.
    10. Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
    11. AFS Head Lamp reset means that the adaptive front lighting system can be rotated to either side, pressing the button means they stay pointing straight forward, and don’t turn anymore when turning the steering wheel.
    12. Gearbox Reset: Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
    13. ACS (Air Conditioner) service, Calibration of air-conditioning related control units, such as additional calibration of air mass flow, etc.
    14. Air conditioning service: Calibration of air-conditioning related control units, such as additional calibration of air mass flow, etc.
    15. Air Filter Self-learning process after replacing the air filter.
    16. Fuel Pump activation function, activate it when replace a new one.

    ATTENTION:

    • Please kindly note: Not all systems, functions are available on all Years, Models – Especially some old car models.
    • This scan tool covers over 20 years of models.
    • Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
    • Please kindly confirm with us about the compatibility first with your VIN, YEAR & Functions you need.
    • Or please reference the Function List of MB V3.0.
    • *We reserve the rights to make any change to this description without notice.

    ICARSOFT CR MAX product functions

    PROFESSIONAL OBDII DIAGNOSIS:

    1. Read Codes.
    2. Erase Codes.
    3. I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
    4. Data stream.
    5. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
    6. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
    7. On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
    8. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
    9. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
    10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes.
    11. Turn off Check Engine Light (MIL), clear codes and reset monitors.
    12. Read live PCM DataStream.
    13. Support CAN (Controller Area Network) and all other.
    14. Multilingual menu and DTC definitions- English, Spanish, and German, etc
    15. Read pending DTCs.
    16. Permanent DTCs.
    17. DTCs search.
    18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
    19. 2001 and later OBDII compliant PETROL European vehicles.
    20. 2004 and later OBDII compliant DIESEL European vehicles.
    21. 1996 and later OBDII compliant US and Asian vehicles.
    22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
    23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More…..

    ICARSOFT CR MAX actuation test

    VEHICLE COVERAGE:

    Most models from 2001 onwards.

    All must have the 16pin diagnostic plug below the dash.

    • American: Chrysler, Ford, GM
    • European: Alfa-Romeo, Audi, BMW, Citroen, Dacia, EU Ford, Fiat, Jaguar, Land Rover, Mercedes Benz, Mini, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW.
    • Australian: Aus Ford, Holden.
    • Asian: Daewoo, Honda, Hyundai, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Toyota

    ICARSOFT CR MAX SPECIFICATIONS:

    • Dimensions(W*H*D): 240.0mm*150.0mm*35.0mm
    • Operating System: Android 8.10
    • Processor: 4Nuclear 1.3GHz
    • Display: 7-inch LCD capacitve touchscreen with 1024×600 resolution

    PACKAGE LIST:

    • Packaging item box
    • Main Unit CR MAX
    • Main OBD2 Cable
    • USB connecting Cable
    • External Power Adapter
    • Quick Quide book
    • Hardcopy User’s Manual.

    Optional Adapters (for old car models ) 

    BENZ 38PIN,  SPRINTER 14PIN,  BMW 20PIN

    ICARSOFT CR MAX package list

    R 2836.29 x 3