Menu Close

Brand: VIDENT

Showing all 15 results

  • R999.00

    VIDENT iEasy200 OBDII/EOBD+CAN Fault Code Reader Scan Tool Multi-Language

    The Vident iEasy200 CAN OBDII/EOBD Code Reader is a ruggedized designed code reader, it works with most 1996 and newer OBDII & CAN compliant cars, light-duty trucks, SUVs, minivans and hybrid sold worldwide.

    Vident iEasy200 turns off Check Engine Light (MIL) and provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.

    VIDENT IEASY200

    What can help for you:

    Turn Off ”Check Engine” Light

    Parts might cause your check engine light on include:
    1. Gas Cap                           7. Spark Plugs
    2. Oxygen Sensor                 8. Thermostat
    3. Air Fuel Ratio Sensor        9. EGR Valve
    4. Mass Air Flow Sensor      10. Evaporative Emission Canister Purge Valve(EVAP)
    5. Ignition Coils                   11. Catalytic Converter.
    6. Spark Plug Wires

    After the engine light is not turned off in time:

    • It will cause serious environmental pollution.
    • Fuel consumption will increase.
    • Engine noise.
    • Increased in temperature, etc.

    VIDENT IEASY200 2

    Top 6 Reasons to recommend iEasy200

    1. Supports All OBDII functions, turn off check engine light, reset monitor, monitor live data stream etc.
    2. Read and clear faults, monitor real-time data flow.
    3. Supported Protocols: J1850-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898)
    4. Supports Multi-language; works with all 12V standard obd2 protocols vehicles(Cars, Light-duty trucks, SUVs, 12V Mini VANs, Mini BUS, Mini trucks and hybrid sold worldwide)
    5. User-friendly Design, I/M Hot keys.
    6. Help to realize full name of the data, to inquiry professional shorthand.

    VIDENT IEASY200 3

    Technical Service & Online Consultation:

    We provide consulting services and repair assistance for common car failures. We combine industry knowledge to provide customers with high-quality products and maintenance solutions to benefit our customers. Professional, Efficiency and Quality is always our mission.

    Vident iEasy200 Functions

    1. Read and clear engine fault codes.
    2. Vident iEasy200 OBD2 one-click I/M can display data waveform display.
    3. Data waveform comparisons are convenient for observing numerical changes.
    4. The full name of the data stream makes the professional shorthand easier to understand.

    Vident iEasy200 Features:

    1. Works with most 1996 and newer OBDII& CAN compliant cars,works with all 12V standard obd2 protocols vehicles
    (Cars Light-duty trucks, SUVs, Mini VANs ,12V Mini BUS,Mini trucks and hybrid sold worldwide)
    2. Support all the 6 OBDII test modes.

    • Read codes     View Freeze Frame Data
    • Erase codes    I/M Readiness
    • Live data         Component Test

    3.One-click I/M for quick view of car emissions increase the intuitive experience of the test.
    4. Read live data streams from the engine sensors – ideal for monitoring intermittent faults
    5. Retrieve VIN, Cal ID and CVN identifiers from ECU (depending on supported models )
    6. Exquisite design – Ergonomic grip handle, bulging membrane switch and gold-plated metal pin
    7. View the fault code definitions on the screen (generic and manufacturer-specific, if any) – thousands of definitions stored within the tool software
    8. Read freeze-frame data.

    Please contact customer service for specific models

    Support 8 Languages:

    English, French, German, Polish, Spanish, Italian, Portuguese, Dutch

    VIDENT iEasy200 Specification:

    • Display: 128*64 pixels, back lit display screen.
    • Operating Temperature: 0 to 60°C (32 to 140°F)
    • Storage Temperature: -20 to 70°C (-4 to 158°F)
    • Power: 8 to 18 V provided via vehicle.

    Supported Protocols: J1850-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898)

    Package includes:

    • iEasy200 OBDII/EOBD Code Reader.
    • User Manual
  • R1,149.00

    VIDENT iEasy300 CAN OBDII/EOBD Fault Code Reader

    The VIDENT iEasy300 CAN OBDII/EOBD Code Reader is a portable check engine code reader for entry-level pro and savvy DIYer. It has a 2.4’’ TFT color screen, hot keys and beepers for I/M readiness test, which enables users to fix faults at home or go to the garage armed with information.

    VIDENT IEASY300

    VIDENT iEasy300 Scan Tool Features:

    1. Works with most 1996 and newer OBDII& CAN compliant cars, light-duty trucks, SUVs, minivans and hybrid sold worldwide
    2. Red-Yellow-Green LEDs and build-in speaker indicate emissions monitor status.
    3. I/M readiness hot keys make it easy to use this tool right out of the package. – quick display of status of all tests on a single screen
    4. Read/ clear stored & pending codes, turn off Check Engine Light (MIL) and resets monitors
    5. View on-screen fault code definitions (generic and manufacturer-specific, where available) – thousands of definitions stored within the tool software
    6. Read freeze-frame data.
    7. Read real-time live data streams from the engine sensors – ideal for monitoring intermittent faults
    8. Graph live engine data on-screen
    9. Automatic VIN acquisition and decoding makes it much easier to read manufacturer specific codes and enhanced mode 6 data
    10. Retrieve VIN, Cal ID and CVN identifiers from ECU (dependent on vehicle support)
    11. Multilingual menu: English, French, German, Polish, Russian, Spanish, Italian, Portuguese, Hungarian, Dutch, Swedish, etc.
    12. Exquisitely designed – Ergonomic grip handle, bulging membrane switch, gilding metal pins
    13. Lifetime FREE software and firmware update via the official site: http://www.videnttech.com

    VIDENT IEASY300 2

    Language (11):  English, French, German, Polish, Russian, Spanish, Italian, Portuguese, Hungarian, Dutch, Swedish
    Default language pack: English, Spanish, Italian, French and German.

    NOTE: There are 3 language packs for the unit.

    You can go to the official site http://www.videnttech.com to change it and get anyone you want.

    VIDENT IEASY300 3

    VIDENT iEasy300 OBD2 Code Reader Specification:

    Display: 2.4” TFT color screen

    Operating Temperature: 0 to 60°C (32 to 140°F)

    Storage Temperature: -20 to 70°C (-4 to 158°F)

    Power: 8 to 18 V provided via vehicle

    Supported Protocols:

    J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898)

    Package includes:

    • iEasy300 OBDII/EOBD Code Reader
    • User’s Guide
    • USB Cable

    VIDENT IEASY300 4

  • R1,199.00

    Vident iBT100 12V Automotive Battery Tester Analyzer for Flooded, AGM, GEL 100-1100CCA Batteries

    The latest Vident iBT100 12 Volt Automotive Battery Analyzer from Vident is dedicatedly developed to test 12V regular flooded, AGM flat plate, AGM spiral and gel batteries.

    Vident iBT100 Battery Tester Analyzer Description:

    Vident iBT100 is a professional analysis and testing equipment for judging the working ability and health status of automobile batteries.
    It is dedicatedly developed to test 12V regular flooded, AGM flat plate, AGM spiral and gel batteries.
    It provides a quick, easy and affordable solution for technicians to view battery charging status, check battery health and detect faults.

    VIDENT iBT100 12V BATTERY ANALYZER

    VIDENT iBT100 12V BATTERY ANALYZER 2

    Vident iBT100 Car Battery Tester Highlights:

    1. Multiple vehicle applications – passenger cars and light duty trucks.
    2. Tests batteries rated from 100 to 1100CCA
    3. Tests multiple battery types – regular flooded, AGM flat plate, AGM spiral and GEL.
    4. Support multiple rating systems – CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE.
    5. Tests the batteries on the car directly – no need to remove the battery. Detects bad cells.
    6. Quick and accurate test result display in just 3 seconds.
    7. Does not emit light, heat or spark, or discharge battery,  keeps operation safe for all levels of users , automatic temperature compensation.
    8. Extremely easy to use with large back light LCD display and menu-driven operation.

    VIDENT iBT100 12V BATTERY ANALYZER SOFTWARE DISPLAY

    Vident  iBT100 Battery Analyzer Design:

    • Lightweight design, easy to carry.
    • Large backlit LCD screen easy to read.
    • Copper power clip, long life, not easy to be oxidized.
    • The appearance of the product conforms to the ergonomic design, and easy to use.
    • Soft rubber operation keys. The pressing feel is soft and comfortable. The rebound force is sensitive.

    Vident iBT100 Battery Tester Support language:

    Mulit-Language: English, French, German, Italian, Polish, Portuguese, Russian, Spanish, Dutch, Turkish.

    Note: The device can directly switch the language. For the specific operation method of switching the language, you can find customer service to provide a video.

    VIDENT iBT100 BATTERY ANALYZER LANGUAGE

    iBT100 12v Battery Tester Specification:

    iBT100 Battery Analyzer Operating Display:

    Package includes:

    • iBT100 Battery Analyzer
    • User’s Manual

    VIDENT iBT100 BATTERY ANALYZER PACKAGE LIST

  • R1,199.00

    VIDENT iEasy 300 PRO CAN OBDII/EOBD Code Reader

    The VIDENT iEasy300 Pro CAN OBDII/EOBD Code Reader is a ruggedized designed and ultra-portable code reader for entry-level pro and savvy DIYer.

    Based on the capabilities of iEasy300 Pro, iEasy300 Pro also features oxygen monitor test, on-board monitor test and component test, which makes it truly the ultimate in versatility and affordability.

    In addition, thousands of troubleshooter code tips help technicians to save diagnosis and repair time.

    VIDENT IEASY300 PRO 1

    VIDENT iEasy300 Pro Features:

    1. Works with most 1996 and newer OBDII& CAN compliant cars, light-duty trucks, SUVs, minivans and hybrid sold worldwide
    2. Support all the 10 OBDII test modes
    3. Red-Yellow-Green LEDs and build-in speaker indicate emissions monitor status. They can also help catch intermittent problems or confirm repairs during a drive cycle.
    4. I/M readiness hot keys make it easy to use this tool right out of the package. – quick display of status of all tests on a single screen
    5. Read/ clear stored & pending codes, turn off Check Engine Light (MIL) and resets monitors
    6. View on-screen fault code definitions (generic and manufacturer-specific, where available) – thousands of definitions stored within the tool software
    7. Look up fault code definitions from the tool’s on-board database
    8. Read freeze-frame data (a snapshot of sensor values when a DTC occurred)
    9. Read real-time live data streams from the engine sensors – ideal for monitoring intermittent faults
    10. Graph live engine data on-screen
    11. View Oxygen Sensor test results (dependent on vehicle support)
    12. View on board monitor test and component test
    13. Automatic VIN acquisition and decoding makes it much easier to read manufacturer specific codes and enhanced mode 6 data
    14. Retrieve VIN, Cal ID and CVN identifiers from ECU (dependent on vehicle support)
    15. Multilingual menu options: English, French, German, Russian, Spanish, Italian, Portuguese, Hungarian, Dutch, Thai, Swedish, etc.
    16. Exquisitely designed – Ergonomic grip handle, bulging membrane switch, gilding metal pins
    17. Life time FREE software and firmware updates

    VIDENT iEasy300 Pro Function List:

    Compatibility: Works with most OBDII & CAN compliant cars, light-duty trucks, SUVs, minivans and hybrid sold worldwide.

    Diagnostics: Support all the 10 OBDII test modes. Reads / clears stored & pending engine trouble codes and resets monitors. Views on-screen fault code definitions (Generic& manufacturer specific) – thousands of definitions stored within the tool.

    Live Data: Text and Graph live engine data. Reads, records, graphs & playback real-time live data streams from the engine sensors – ideal for monitoring intermittent faults

    Other Tests: View Oxygen Sensor Test, On-board Monitor Test and Component Test Advanced Mode 6 Functions – Non-continuously Monitored Systems test results.

    Freeze-Frame: Read engine data conditions such as fuel trim, engine coolant temp, etc.

    I/M Readiness: Quick display of status of all tests on a single screen. Red-Yellow-Green LED lights and build-in speakers indicate emissions monitor status.

    Retrieve Protocol: VIN, Cal ID and CVN identifiers from ECU (dependent on vehicle support).

    Hardware: Exquisitely designed – Ergonomic grip handle, bulging membrane switch, and gliding metal pins. A simple click from the short-cut menu to enter update mode.

    Software Update: Life-time FREE software

    VIDENT iEasy 300 Pro software:

    VIDENT IEASY300 PRO 2

    Specification:

    Display 2.4” TFT color screen
    Operating Temperature 0 to 60°C (32 to 140°F)
    Storage Temperature -20 to 70°C (-4 to 158°F)
    Power 8 to 18 V provided via vehicle
    Supported Protocols J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898)
    Dimensions 125mm*80mm*24mm

    Package list:

    • iEasy300 OBDII/EOBD Code Reader
    • User’s Guide
    • USB Cable

    VIDENT IEASY300 PRO 3

  • R1,299.00

    VIDENT IEASY320 OBDII EOBD CAN CODE READER OBD2 SCANNER

    The Vident iEasy320 CAN OBDII/EOBD Check Engine Fault Code Reader = iEasy300 abilities + oxygen monitor test + on-board monitor test + component test

    VIDENT iEasy320 Enhanced OBDII/EOBD+CAN Code Reader

    VIDENT IEASY320 OBDII EOBD CAN CODE READER

    The Vident iEasy320 scanner is a portable CAN OBDII/EOBD code reader for professionals and DIYers.
    It not only cover iEasy300 functionalities, but also is able to oxygen monitor test, on-board monitor test, and component test.
    Works with most 1996 and newer OBDII& CAN compliant cars, light-duty trucks, SUVs, minivans and hybrid sold worldwide.

    VIDENT IEASY320 OBDII EOBD CAN CODE READER 1

    VIDENT iEasy320 Vehicles Coverage: 

    As a general rule it covers most cars as:

    • Some Japanese Petrol/Diesel cars made from 2000
    • European Petrol cars from 2001
    • European Diesel Cars from 2004
    • Holden from 2006
    • Subaru(engine codes) from 2003

    VIDENT IEASY320 OBDII EOBD CAN CODE READER DTC LOOKUP

    Language:

    It has multilingual menu options (11  languages)
    English, French, German, Polish, Russian, Spanish, Italian, Portuguese, Hungarian, Dutch, Swedish
    (Scanner comes with 5 languages in default. You can add more language through the update tool)

    iEasy 320 Code Scanner Software Update:

    • Unique shortcut menu to enter update mode easily.
    • Life time FREE software and firmware updates.

    Vident iEasy 320 Scan Tool Software 

    Specification:

    • Display: 2.8” LCD color screen
    • Operating Temperature: 0 to 60°C (32 to 140°F)
    • Storage Temperature: -20 to 70°C (-4 to 158°F)
    • Power: 8 to 18 V provided via vehicle

    Protocols:

    J1850-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN.

    Support all the 10 OBDII test modes:

    1. Red-Yellow-Green LEDs and build-in speaker indicate emissions monitor status. Help catch intermittent problems or confirm repairs during a drive cycle.
    2. I/M readiness hot keys make it easy to use this tool right out of the package.
    3. Quick display of status of all tests on a single screen.
    4. Read/ clear stored & pending codes, switch off Check Engine Light (MIL) and resets monitors.
    5. View on-screen fault code definitions (Generic, manufacturer specific, pending and permanent, where available) – thousands of definitions stored within the tool software.
    6. Look up fault code definitions from the tool’s on-board database.
    7. Read freeze-frame data engine conditions namely fuel trim, engine coolant temp, etc., at the time the Malfunction Indicator Lamp (MIL) was set(a snapshot of sensor values
      when a DTC occurred)
    8. Read, records, graphs & playbacks real-time live data streams from the engine sensors- ideal for monitoring intermittent faults Graph live engine data on-screen.
    9. View Oxygen Sensor test results (dependent on vehicle support)
    10. View on board monitor test and component test
    11. Retrieve protocol, VIN, Cal ID and CVN identifiers from ECU (dependent on vehicle support)
    12. Enhanced Mode 6 functions—Non-continuously Monitored Systems test results.
      Automatic VIN acquisition and decoding makes it much easier to read manufacturer specific codes and enhanced mode 6 data
    13. Test and display the voltage of battery.
    14. Support max. 4 graphic comparisons of data stream

    Package includes:

    • VIDENT iEasy320 OBD2 Code Reader.
    • User Manual.
    • USB PC cable for updating software.

    VIDENT IEASY320 OBDII EOBD CAN CODE READER PACKAGE

     

  • R1,799.00

    VIDENT IBT200 IS 12V/ 24V CAR BATTERY TESTER AND ANALYZER

    The Vident IBT200 Is 12V/ 24V Car Battery Tester Allows You Test The Health Of The Battery In Seconds. And Analyze The Battery Health, Check The Car Cranking And Charging System.

    This Tester Supplies Readings By A High-Resolution LCD Display With Great Design Of Easy-To-Use Buttons Operation, Intelligent Test Methods And Reverse Polarity Protection. Best Tool In The Fields Of Battery Sales, Vehicle Repair And Battery Inspection In Equipment System Associated With Lead-Acid Starting Battery.

    ALL VIDENT PRODUCTS: https://www.cardiagnosticsa.co.za/brand/vident/

    VIDENT IBT200

    VIDENT IBT200 HIGHLIGHTS:

    1. Multiple Vehicle Applications :12V Passenger Vehicles And 24V Heavy Duty Trucks (9V ~36V)
    2. Test Batteries Rated From 100 To 2000CCA
    3. Multiple Battery Types Testing: VRLA, GEL, AGM, SLA
    4. Multiple Rating Systems Testing: CCA, JIS, DIN, IEC, EN, GB
    5. Directly Test The Battery On The Car, Without Battery Moving
    6. Test Options: Battery Test, Cranking Test And Charging Test
    7. Quick And Accurate To Achieve Test Results In 3 Seconds
    8. Doesn’t Emit Light, Heat Or Spark, Or Discharge Battery: Keep Operation Safe For All Levels Of Users
    9. Extremely Easy To Use With Large Backlight LCD Display And Menu-Driven Operation
    10. Three Colour Lights To Indicate Battery Conditions
    11. Multi Language: English, German, Italian, French, Spanish, Portuguese, Hungarian, Polish, Slovak, Czech, Russian, Dutch, Swedish, Japanese
    12. Paper User Manual Are Available In English, Spanish, German.

    VIDENT IBT200 BATTERY TESTER FUNCTIONS:

    1.Battery Volts -12V Passenger Vehicles And 24V Heavy Duty Trucks (9V ~36V)

    VIDENT IBT200 Multiple vehicle coverage

    2.Battery State Of Health (SOH) And Test Result Reference Table.

    3.Vident IBT200 Battery Test, Cranking Test And Charging Test​​.

    4.Multiple Battery Types Testing Like VRLA, GEL, AGM, SLA

    Battery System Standard Supported: CA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE

    PARAMETERS:

    • Voltage Measuring: 9V-36V.
    • Battery Type: URLA, GEL, AGM, SLA.
    • Battery Rating: 100CCA-2000CCA.
    • Standard Support: CCA, JIS, DIN, IEC, EN, GB.
    • Operation Temperature: 0 ~ 60°C (-4°F~140 °F)
    • Storage Temperature: 0 ~ 70°C (-4 °F~158 °F)

    PACKAGE LIST:

    • IBT200 Battery Tester.
    • User Manual.

    VIDENT IBT200 package list

  • R3,699.00

    VIDENT iLink440 Four System Scan Tool Support Engine ABS Air Bag

    SRS EPB and Reset Battery Configuration

    Vident iLink440 is designed for technicians to troubleshoot engine, transmission, ABS and airbag faults for almost all American, Asian and European vehicles on the road today. It also offers oil light reset, EPB service and battery configuration function free of charge.

    VIDENT ILINK440 1

    Vident iLink440 Features:

    1. Provides easy diagnosis on almost all American, Asian, and European vehicles.
    2. Will Work on both OBDI and OBDII cars. (including the latest 2019 models on selected makes)
    3. Reads and clears codes and turns off MILs of engine, transmission, ABS and airbags system.
    4. Manual and automatic VIN option.
    5. Oil Service Reset functions on 49 makes.
    6. Supports Electronic Park Brake (EPB) features on 41 makes.
    7. Battery Configuration on 18 makes.
    8. Request and record live sensor data, display live data graphs and merge 2 parameter graphs into one coordinate.
    9. Multilingual menu options.
    10. 2.8″LCD color display, clearly arranged keys, menu-driven operation.
    11. Its ruggedized design and rubber sleeve to resist impact.
    12. 3 years free software update via the official site: http://www.videnttech.com

    VIDENT ILINK440 2

    Language Supported:

    English, French, German, Spanish, Italian, Dutch, Swedish, Japanese, Korean, Portuguese, Hungarian, Russian, Thai, Simplified Chinese and Traditional Chinese

    Function support list:

    Diagnostic Function Battery Configuration EPB Service Oil light/Service Reset
     

     

     

     

     

     

     

     

    Coverage

    Chrysler, Ford, GM, Brazilian GM(For Brazilian Market Only)
    Au Ford (For Australian Market Only), Acura,  Daewoo, Honda, Holden (For Australian Market Only), Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, Subaru, Suzuki, Ssangyong, Tata, Toyota
    Abarth, Alfa-Romeo, Aston Martin, Audi, Bentley, BMW, Bugatti, Citroen, Dacia, Fiat, EU Ford, Jaguar, Land Rover, Lancia, Lamborghini, Maserati, Maybach, Mercedes Benz, Mini, Opel, Porsche, Peugeot, Renault,Rolls-Royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, Volkswagen
    BRILLIANCE, BYD, CHANGAN, CHANGHEAUTO, CHERY, CHERY_NE, EMGRAND, ENGLON, FOTON, GEELY, GLEAGLE, GREATWALL, JAC, KARRY, LIFAN, MAPLE, RELY,RIICH
    Audi, BMW, Citroen, Ford, Infiniti, Jaguar, Land Rover, Lexus, Mini, Mitsubishi, Nissan, Peugeot, Seat, Skoda, Toyota, Volvo, VW Acura, Abarth, Audi, Alfa Romeo, BMW, Bentley, Bugatti, Citroen, Daewoo, EU Ford, Ford, Fait, Ferrari, GM, Honda, Hyundai, Jaguar, Kia, Land Rover, Lancia, Lexus, Maserati, Maybach, Mercedes Benz, Mini, Opel, Peugeot, Porsche, Roewe, Renault, Rolls Royce, Saab, Scion, Seat, Skoda, Toyota, Vauxhall, Volkswagen, Volvo Acura, Abarth, Alfa Romeo, Audi, Aston Martin, BMW, Bentley, Bugatti, Citroen, Chrysler, Dacia, Ferrari, Fiat, Ford, GM, Holden, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Lancia, Lexus, Land Rover, Mercedes Benz, Mini, Mazda, Maserati, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rolls-Royce, Saab, Seat, Skoda, Scion, Subaru, Suzuki, Smart, Sprinter, Toyota, Vauxhall, Volkswagen, Volvo

    VIDENT ILINK440 3

    Specification:

    Display 2.8” Backlit, 320X240 TFT color screen
    Operating Temperature 0 to 60°C (32 to 140°F)
    Storage Temperature -20 to 70°C (-4 to 158°F)
    Power 8 to 18 V provided via vehicle
    Supported Protocols J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898)
    Tool Dimensions 194*117*47mm (L*W*H)
    Color Box 220*165*85mm (L*W*H)

    Package includes:

    User’s Guide
    Memory Card
    USB Cable
    Leather Carrying Pouch

     

  • R3,799.00

    Vident iEasy320HD Diesel & Petrol Heavy Duty Truck Diagnostic Tool Car OBD2 Scanner

    Vident iEasy320HD Diesel & Petrol Heavy Duty Truck Diagnosticd tool is a professional fault diagnosis tool designed specifically for Heavy Duty vehicles (Diesel) and passenger cars (Gasoline or Petrol). which enables users to Read DTCs, Clear DTCs and view the data stream with a live color graphing.

    It covers a wide range of vehicles since it offers multiple data bus protocols, for accessing Engine, Transmission, Brakes and more.

    Namely:

    J1587, J1939, J1850VPW, J1850PWM, ISO9141, KWP2000(ISO14230-4) and CAN (Control Area Network ISO15765-4).

    Additionally, it not only a truck code reader, but also an OBD2 scanner which support 10 OBDII Communication Modes. It features a 2.8” full color LCD display and is ergonomic, highly portable and easy to uses.

    Work on almost all cars, mini vans and light duty vehicles.

    American Car from 1996 up to now European Car from 2001 up to now Asian Car from 2008 up to now. Cover Class 4 (14,001 lbs) through Class 8 (33,000 lbs) Heavy Duty Trucks.

    Vident iEasy320HD 1

    Vident iEasy320HD Features:

    1. Vehicle Communication Protocols, J1587/1708

    2. J1850VPW, J1850PWM, IS09141, KWP2000(IS014230-4) and CAN (Control Area Network IS015765-4) Vehicle Communication Protocols

    3. 6PIN, 9PIN, 16PINDLC

    4. Support all the 10 OBDII test modes, enhanced Mode 6 functions—Non-continuously Monitored Systems test results.

    5. Multi-systems, e.g: Engine, Transmission, Brake, Fuel, Body Control, Chassis, etc

    6. l/M Readiness: Red-Yellow-Green LEDs and build-in speakers indicate emissions monitor status. They can also help catch intermittent problems or confirm repairs during a drive cycle.

    7. Graph live data on-screen

    8. Retrieve protocol, VIN, Cal ID and CVN identifiers from ECU (dependent on vehicle support)

    9. Multilingual menu options: English, French, Spanish, Germany, and Russian

    Vident iEasy320HD 2

    VIDENT iEasy320HD is specially developed for heavy duty vehicles (Diesel) and passenger cars (Gasoline or Petrol), which enables users to read DTCs, clear DTCs and view the data stream with a live color graphing.

    It covers a wide range of vehicles since it offers multiple data bus protocols, such as J1587, J1939, J1850VPW, J1850PWM, ISO9141, KWP2000(ISO14230-4) and CAN(Control Area Network ISO15765-4).

    Multiple Systems:

    Engine, Transmission, Instrument Panel, Drive train, Braking System, Suspension, ABS, ESP, EPS, Fuel System and etc.

    You can get real time data related to system and do some repair by yourself using this truck tool, which will save much time and money.

    Wide Coverage:

    iEasy320HD is a 2 in 1 heavy duty trucks & cars diagnostic scan tool, which cover most vehicle 1996 and newer.

    Not only can work on Freightliner, Kenworth, Mack, International, Sterling, Paccar, Peterbilt, Caterpillar, Western Star, Mercedes-Benz, Man, Scania, VOLVO, Renault, Erf, Foden, Seddon-Atikinson, Iveco, Daf, Sisu, Steyr, ISUZU, Hino and more diesel HD trucks, but also can support all cars, mini vans and light duty vehicles.

    I/M Readiness (Smog Check):

    Red-Yellow-Green LEDs and build-in speaker indicate emissions monitor status.

    Clearly shows whether the emission-related systems are operating properly or ready for inspection and maintenance testing.

    Turns off the MIL(check engine light) and resets monitors; views freeze frame data, read live PCM data stream, EVAP system test data, On-Board Monitor test data and display live O2 sensor test data.

    They can also help catch intermittent problems or confirm repairs during

    Multiple Language:

    Support English, French, German, Spanish & Russian. Lifetime free software upgrade.

    Vident iEasy320HD 3

    Support Truck Vehicles:

    HDOBD Diagnosis Includes:

    • I/M Readiness, Engine, Transmission, Brake, Cluster, Body Control, Chassis J1939.
    • J1587/1708 (6/9PIN) – Quick Check Live Data, Engine, Transmission, Brake, Instrument Panel, Vehicle Management, Fuel System, Cab Climate, Particulate
    • With J1587/1708 (16PIN) – Quick Check Live Data, Engine, Transmission, Brake, Instrument Panel, Vehicle Management, Fuel System, Cab Climate, Particulate.

    Software display:

    Specifications:

    Operating Temperature: 0 to 60°C (32 to 140°F)
    Storage Temperature: -20 to 70°C (-4 to 158°F)
    Power: 8 to 18 V provided via vehicle

    Vident iEasy320HD 4

    Packaging Includes:

    1 x iEasy320HD Code Reader
    1 x OBD2 Splitter Cable (6PIN & 9PIN)
    1 x Carry Case
    1 x Instruction manual

  • R4,999.00

    Vident iLink 450 OBD2 Diagnostic Tool EPB Service Oil ABS Airbag SRS TBA/TPS SAS reset BRT DPF Regeneration Diagnostic Tool update online

    • The iLink 450 OBD2 Diagnostic Tool is a Full Service Tool is specially designed for professional technicians and body shops to service individual specialized systems.
    • The functions include EPB, Oil Service, ABS&SRS reset, Battery Configuration, Steering Angle Sensor Calibration, DPF regeneration and Throttle body alignment
    • Language Support: English, French, German, Polish, Russian, Spanish and much more.
    • Default language is English,other language please update via official website.
    • It comes with 3 years free update on the official site.

    VIDENT iLink 450 OBD2 Diagnostic Tool support ABS&SRS reset /DPF/Battery Configuration Full Service Tool

    Vident iLink 450 1

    Vident iLink 450 OBD2 Diagnostic Tool Features:

    Service/Oil Light Reset coverage for over 40 Asian and European vehicle makes:

    1. Resets Oil Service Light
    2. Resets Oil Inspection Light
    3. Sets Inspection Service Interval (1 & 2)
    4. Sets Inspection Mileage
    5. Provides on-screen service reset instructions for vehicles which do not support electronic service resets

    Electronic Parking Brake(EPB) servicing coverage for over 30 Asian and European vehicle makes:

    1. Deactivates and re-activates brake control system
    2. Retracts calipers for brake pad replacement
    3. Advances calipers after servicing to the original position, without affecting current calibration
    4. Reads and clears trouble codes (fault codes)
    5. Turns off brake warning light
    6. Initializes the wear indicator if required when new pads installed
    7. Diagnoses EPB/SBC caliper functionality
    8. Resets the brake pad thickness after service on Audi A8
    9. Performs ECU controlled brake fluid change

    VIDENT iLink 450 Battery Configuration(BRT)

    After changing battery on cars, particularly if equipped with Start & Stop function and/or regenerative breaking system, a smart battery replacement tool as iLink 450 is required to associate the new battery with the vehicle ECU to complete the job and start the engine. iLink 450 offers a cost-effective solution for independent garages to work on modern vehicle battery and helps them to get prepared for the future of the battery business. Supports all brands of battery.

    ABS & Air-bag Reset

    • Reads and clear codes and turns off ABS/Airbag warning indicator.
    • Performs bi-directional control tests, such as ABS motor test, actuator test, ABS bleeding, airbag reset and so on.

    Throttle Body Alignment (TBA/TPS)

    • After cleaning or replacing the Electronic Throttle Body, adaptation must be carried out (also the case if the negative terminal of the battery has been disconnected or when the Engine Control Unit has been replaced). The iLink 450 will perform Electronic Throttle Body adaptations on supported vehicles.

    SAS Reset Function

    • The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned.
    • The signal is mainly used by the ABS System as part of its stability control function but also by other systems such as ride level control and adaptive lighting.
    • A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
    • If the Steering Angle Sensor (SAS) needs to be changed, many vehicles require the new sensor to be calibrated.
    • The ilink 450 Tool will allow you to carry out steering angle re-calibration on supported models.

    DPF Regeneration or Replacement

    Carry out a forced Diesel Particulate Filter (DPF) Regeneration is required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot. The iLink 450 is also capable of regenerating Diesel Particulate Filters and resets the DPF light after the filter has been replaced.

    Vident iLink 450 2

     

    VIDENT iLink 450 Vehicle Coverage:

    Oil Light Service:

    For Acura, For Abarth, For Alfa Romeo, For Audi, For Aston Martin, For BMW, For Bentley, For Bugatti, For Citroen, For Chrysler, For Dacia, For Ferrari, For Fiat, For Ford, For GM, For Holden, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Kia, For Lancia, For Lexus, For Land Rover, For Mercedes Benz, For Mini, For Mazda, For Maserati, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Rolls-Royce, For Saab, For Seat, For Skoda, For Scion, For Subaru, For Suzuki, For Smart, For Sprinter, For Toyota, For Vauxhall, For Volkswagen, For Volvo

    EPB Functions:

    For Acura, For Abarth, For Audi, For Alfa Romeo, For BMW, For Bentley, For Bugatti, For Citroen, For Daewoo, For EU Ford, For Ford, For Fait, For Ferrari, For GM, For Honda, For Hyundai, For Jaguar, For Kia, For Land Rover, For Lancia, For Lexus, For Maserati, For Maybach, For Mercedes Benz, For Mini, For Opel, For Peugeot, For Porsche, For Roewe, For Renault, For Rolls Royce, For Saab, For Scion, For Seat, For Skoda, For Toyota, For Vauxhall, For Volkswagen, For Volvo

    Battery Configuration:

    For Audi, For BMW, For Citroen, For Ford, For Infiniti, For Jaguar, For Land Rover, For Lexus, For Mini, For Mitsubishi, For Nissan, For Peugeot, For Seat, For Skoda, For Toyota, For Volvo, For VW

    ABS & SRS Diagnosis:

    For Chrysler, For Ford, For GM, For Au Ford, For Acura, For Daewoo, For Honda, For Holden, For Hyundai, For Infiniti, For Isuzu, For Kia, For Lexus, For Mazda, For Mitsubishi, For Nissan, For Scion, For Subaru, For Suzuki, For Toyota, For Abarth, For Alfa Romeo, For Audi, For Aston Martin,BMW, For Bentley, For Bugatti, For Citroen, For Dacia, For EU Ford, For Fiat, For Ferrari,Jaguar, For Lamborghini, For Lancia, For Land Rover, For Maybach, For Mercedes Benz, For Mini, For Opel, For Porsche, For Peugeot, For Renault, For Rolls-Royce, For Saab, For Seat, For Skoda, For Smart, For Sprinter, For Vauxhall, For Volkswagen, For Volvo

    DPF Functions:

    For Acura, For Alfa Romeo, For Audi, For Bentley, For Bugatti, For Mercedes Benz, For BMW, For Chrysler, For Citroen, For Dacia, For Fiat, For GM, For Honda, For Hyundai, For Infiniti, For Kia, For Jaguar, For Lancia, For Lamborghini, For Land Rover, For Lexus, For Maserati, For Maybach, For Mini, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Renault, For Rolls-Royce, For SsangYong, For Scion, For Seat, For Skoda, For Sprinter, For Subaru, For Toyota, For Vauxhall, For Volkswagen, For VW_CV

    TBA/TPS(Throttle Body Alignment)

    For Acura, For Audi, For BMW, For Citroen, For Daewoo, For Ford, For Geely, For GM, For Honda, For Hyundai, For Infiniti, For Kia, For Land Rover, For Lexus, For Lincoln, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Saab, For Seat, For Skoda, For Toyota, For VW, For BYD, For Brilliance, For Changan, For Chery, For Dpfv, For Geely, For Greatwall, For Hnmazda, For Huizhong, For JAC, For Lifan, For MG, For Qnlotus, For Roewe, For Spark, For Wuling, For Zzmazda, For Zznissan

    Vident iLink 450 3

    Specification:

    • Display: 2.8” Backlit, 320X240 TFT color screen
    • Operating Temperature: 0 to 60°C (32 to 140°F)
    • Storage Temperature: -20 to 70°C (-4 to 158°F)
    • Power: 8 to 18 V provided via vehicle
    • Supported Protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO 14230), and CAN (Control Area Network ISO 11898)
    • Tool Dimensions: 194*117*47mm (L*W*H)
    • Color Box: 220*165*85mm (L*W*H)
    • Weight: 0.9KG

    Package includes:

    • Kit Include
    • Link450 Scan Tool
    • User’s Guide
    • Memory Card
    • USB Cable
    • Leather Carrying Pouch

  • R5,999.00

    VIDENT iAuto 710 Advanced Full System Diagnostic Tool.

    Vident iAuto 710 is a professional level diagnostic handheld tool, offering comprehensive system coverage for a vast array of car manufacturers. Featured with all system diagnosis including engine, transmission, ABS, Airbag, instrument, steering wheel, etc., and the most commonly required service features oil light/service reset, EPB, Battery configuration, diesel particulate service,  throttle body alignment and steering angle sensor calibration, iAuto 710 is built to take your diagnostic experience to a new level.

    iAuto 710 is an excellent choice for a scan tool to access and diagnose most system clusters on over 76 car brands. Both OBDI and OBDII compatible. Get complete reports of trouble codes and their meanings and monitor multiple live sensor data in text and graph format. Other functions include Oil Service & Mileage reset, SAS, EPB, DPF, TBA and Battery Coding & Registration. Comes with 3 Yrs free software update

    VIDENT iAuto 710 Features

    VIDENT iAuto 710 Software Features 1 VIDENT iAuto 710 Software Features 2 VIDENT iAuto 710 Software Features 3 VIDENT iAuto 710 Software Features 4

    OBD2 & OBD1 Cars Diagnostics

    It is important for auto repair workshops and mechanics to get as much coverage as possible to effectively and quickly service vehicles. The iAuto 710 scan tool provides easy diagnosis over 76 American, Asian and European car make so you don’t have to turn down your customers driving to your workshop anymore.

    VIDENT iAuto 710 Vehicle List

    SPECIFICATIONS:

    • Display: 4.3” Backlit, 480*272 TFT color screen.
    • Operating Temperature: 0 to 60°C (32 to 140°F).
    • Storage Temperature: -20 to 70°C (-4 to 158°F).
    • Power: 8 to 18 V provided via vehicle.
    • Supported Protocols: ISO9141-2, ISO14230-2, ISO15765-4, K/L lines, Double K Line SAE-J1850 VPW, SAE-J1850PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed and Single wire CAN, KW81, KW82, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6, SAE J1939, SAE J1939, SAE J1708, Fault-Tolerant CAN.
    • Tool Dimensions: 212*117*47mm (L*W*H).
    • Weight: 1.4KG.
    • CTN MEAS: 69*52*37cm.

    VIDENT iAuto 710 KIT INCLUDES:

    • iAuto710 Scanner.
    • Diagnostic cable.
    • User Manual.
    • Memory Card.
    • Password Paper.
    • Card Reader.
    • Tool Case.

  • R6,199.00

    2018 Original VIDENT iAuto700 Professional All System Diagnostic Tool Better than Autel MD802

    VIDENT iAuto700 is a professional level diagnostic handheld tool, offering comprehensive system coverage for a vast array of car manufacturers. Featured with all system diagnosis including engine, transmission, ABS, Airbag, instrument, steering wheel, etc., and the most commonly required service features oil light/service reset, EPB and Battery configuration, iAuto700 provides workshops, technicians and enthusiasts alike affordable professional diagnostics solutions.

    VIDENT iAuto700 Full System All Make Scan Tool

    VIDENT iAuto700 Features:

    1. Provide easy diagnosis over 76 American, Asian and European vehicle makes.
    2. Work on OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide, including the latest 2017 models on selected makes.
    3. Read and clears codes and turns off MILs of all systems (typically Engine, ABS, Airbags, Immobilizer, Instrument Cluster, Climate Control, Power Steering, Automatic Transmission and more!).
    4. Support Oil Service Reset, service mileage and interval reset.
    5. Electronic Parking Brake (EPB) reset Support .
    6. Support Battery Configuration.
    7. Identifies the vehicle you are testing rapidly and accurately on the basis of its VIN number.
    8. It shows live vehicle sensors data in text and graph format and allows you to focus on any suspicious or symptom specific data.
    9. You can view 2 parameter graphs simultaneously and merge them into one coordinate, so you can easily see how they affect each other, providing you with the most comprehensive and functional look at live data possible.
    10. Retrieves ECU information.
    11. Displays freeze frame data.
    12. Supports all OBDII test models namely live data, O2 sensor test, component test and more.
    13. Allow to print out diagnostic test data via PC suite.
    14. Multilingual menu options-English, French, German, Spanish, Italian, Dutch, Polish, Swedish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Portuguese, Hungarian, Russian, Thai
    15. Internet updatable via USB.
    16. 4.3″LCD color display, clearly arranged keys, menu driven operation, and shortcuts together make this device extremely easy to use.
    17. Its ruggedized design and rubber sleeve resist impact and damage in the tough workshop environment.

    VIDENT iAuto700. Function and Vehicle Coverage.

    General Diagnostic Function

    Chrysler, Ford, GM, Brazilian GM(For Brazilian Market Only)
    Au Ford (For Australian Market Only), Acura, Daewoo, Honda, Holden (For Australian Market Only), Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mahindra, Mitsubishi, Nissan, Perodua, Proton, Scion, Subaru, Suzuki, Ssangyong, Tata, Toyota
    Abarth, Alfa-Romeo, Aston Martin, Audi, Bentley, BMW, Bugatti, Citroen, Dacia, Fiat, Ferrari, EU Ford, Jaguar, Land Rover, Lancia, Lamborghini, Maserati, Maybach, Mercedes Benz, Mini, Opel, Porsche, Peugeot, Renault,Rolls-Royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, Volkswagen, VW_CV
    BRILLIANCE, BYD, CHANGAN, CHANGHEAUTO, CHERY, CHERY_NE, EMGRAND, ENGLON, FOTON, GEELY, GLEAGLE, GREATWALL, KARRY, LIFAN, MAPLE, RELY,RIICH

    Oil Light Service

    Acura, Abarth, Alfa Romeo, Audi, Aston Martin, BMW, Bentley, Bugatti, Citroen, Chrysler, Dacia, Ferrari, Fiat, Ford, GM, Holden, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Lancia, Lexus, Land Rover, Mercedes Benz, Mini, Mazda, Maserati, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rolls-Royce, Saab, Seat, Skoda, Scion, Subaru, Suzuki, Smart, Sprinter, Toyota, Vauxhall, Volkswagen, Volvo.

    EPB Functions.

    Acura, Abarth, Audi, Alfa Romeo, BMW, Bentley, Bugatti, Citroen, Daewoo, EU Ford, Ford, Fait, Ferrari, GM, Honda, Hyundai, Jaguar, Kia, Land Rover, Lancia, Lexus, Maserati, Maybach, Mercedes Benz, Mini, Opel, Peugeot, Porsche, Roewe, Renault, Rolls Royce, Saab, Scion, Seat, Skoda, Toyota, Vauxhall, Volkswagen, Volvo

    Battery Configuration.

    Audi, BMW, Citroen, Ford, Infiniti, Jaguar, Land Rover, Lexus, Mini, Mitsubishi, Nissan, Peugeot, Seat, Skoda, Toyota, Volvo, VW.

    VIDENT iAuto700 Specification

    • Display: 4.3” Backlit, 480*272 TFT color screen
    • Operating Temperature: 0 to 60°C (32 to 140°F)
    • Storage Temperature: -20 to 70°C (-4 to 158°F)
    • Power: 8 to 18 V provided via vehicle.

    Supported Protocols: ISO9141-2, ISO14230-2, ISO15765-4, K/L lines, Double K Line SAE-J1850 VPW, SAE-J1850PWM, CAN ISO 11898, Highspeed, Middlespeed, Lowspeed and Single wire CAN, KW81, KW82, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6, SAE J1939, SAE J1939, SAE J1708, Fault-Tolerant CAN.

    Package includes:

    • iAuto700 Scan tool.
    • Diagnostic cable.
    • User’s Guide.
    • Memory Card.
    • USB Cable.
    • Blow mold carrying case
  • R6,199.00

    Vident iAuto730 Advanced All System OBDI/OBDII  Scan Tool.

    Vident iAuto730 is a professional level diagnostic handheld tool, offering comprehensive system coverage for a vast array of car manufacturers. Featured with all system diagnosis including engine, transmission, ABS, Airbag, instrument, steering wheel, etc., and the most commonly required service features OIL, EPB, SAS, BRT, ABS Bleeding, TPA(TPS), TPMS, DPF, IMMO, Injector coding, Gear learning. iAuto730 is built to take your diagnostic experience to a new level.

    Vident iAuto730 Advanced All System Scan Tool Features

    Software Features

    • Provide easy diagnosis over 78 American, Asian and European vehicle makes
    • Read and erase Diagnostic Trouble Codes (DTC’s), Retrieves ECU information, Displays freeze frame data, data stream, active test, all special functions for most (if not all) electronically controlled systems, including Engine, ABS, Airbag, Automatic Transmission, Immobilizer, Climate Control, etc.
    • Work on OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide, including the latest 2019 models on some makes
    • It shows live vehicle sensors data in text and graph format and allows you to focus on any suspicious or symptom specific data. You can view 2 parameter graphs simultaneously and merge them into one coordinate, so you can easily see how they affect each other, providing you with the most comprehensive and functional look at live data possible
    • Allow to print out diagnostic test data via PC suite
    • 3 Years free software update.

    Vident iAuto730 Advanced All System Scan Tool Software Features

    Vident iAuto730 Advanced All System Scan Tool Software Features 1

    Vident iAuto730 Advanced All System Scan Tool Software Features 2

    Vident iAuto730 Vehicle Coverage:

    • American: Chrysler, Ford, GM
    • European: Abarth, Alfa-Romeo, Audi, Bentley, BMW, Bugatti, Citroen, Dacia, EU Ford, Fiat, Jaguar, Lancia, Land Rover, Maserati, Maybach, Mercedes Benz, Mini, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW.
    • Australian: Aus Ford, Holden.
    • Asian: Acura,Daewoo, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Scion, Subaru, Suzuki, Ssangyong, Toyota.

    Vehicle Coverage Functions:

    Vident iAuto730 Vehicle Coverage:

    Specifications:

    Display: 4.3” Backlit, 480*272 TFT color screen
    Operating Temperature: 0 to 60°C (32 to 140°F)
    Storage Temperature: -20 to 70°C (-4 to 158°F)
    Power: 8 to 18 V provided via vehicle
    Supported Protocols: ISO9141-2, ISO14230-2, ISO15765-4, K/L lines, Double K Line SAE-J1850 VPW, SAE-J1850PWM, CAN ISO 11898, Highspeed, Middle speed, Low speed and Single wire CAN, KW81, KW82, GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6, SAE J1939, SAE J1939, SAE J1708, Fault-Tolerant CAN.
    Tool Dimensions: 212*117*47mm (L*W*H)
    Weight: 1.4KG

    Vident iAuto730 Kit Includes:

    • iAuto730 Scanner
    • Diagnostic cable
    • User Manual
    • Memory Card
    • Password Paper
    • Card Reader
    • Tool Case

     

  • R6,999.00

    VIDENT IAUTOMASTER PRO ALL SYSTEM SCANNER WITH SPECIAL FUNCTIONS

    The Vident IAutomaster Pro Is A Professional Level Diagnostic Handheld Tool, Offering Comprehensive System Coverage For A Vast Array Of Car Manufacturers. Featured With All System Diagnosis Including Engine, Transmission, ABS, Airbag, Instrument, Steering Wheel, Etc, And The Most Commonly Required Service Functions Like OIL, EPB, SAS, BRT, ABS Bleeding, TPA(TPS), TPMS, DPF, IMMO, Injector Coding, Gear Learning. IAutomaster-Pro Is Aim To Make People’s Vehicle Diagnosis Easier And Faster.

    ALL VIDENT PRODUCTS: https://www.cardiagnosticsa.co.za/brand/vident/

    VIDENT IAUTOMASTER Pro

    IAUTOMASTER PRO FEATURES:

    • Provide Easy Diagnosis On Over 78 American, Asian, European And China Vehicle Makes.
    • Work On Most OBDI And OBDII Cars, SUVs, Minivans, Light-Duty Trucks Sold Worldwide, Including The Latest Models On Many Makes.
    • Read And Erase Diagnostic Trouble Codes (DTC’s), Read System Information, Displays Freeze Frame Data, Read Live Data.
    • Identifies The Vehicle You Are Testing Rapidly And Accurately On The Basis Of Its VIN Number.
    • It Shows Live Vehicle Sensors Data In Text And Graph Format And Allows You To Focus On Any Suspicious Or Symptom Specific Data.
      You Can View Two Parameter Graphs Simultaneously And Merge Them Into One Coordinate, So You Can Easily See How They Affect Each Other, Providing You With The Most Comprehensive And Functional Look At Live Data Possible.
    • Supports Multiple Languages: English, Spanish, German, French, Etc.
    • Internet Updatable Via USB Card Reader.
    • 4.3″LCD Color Display, Clearly Arranged Keys, Menu Driven Operation, And Shortcuts Together Make This Device Extremely Easy To Use.
    • Its Ruggedized Design And Rubber Sleeve Resist Impact And Damage In The Tough Workshop Environment.
    • 3 Year Free Update Online Via Official Website: Http://Videnttech.Com/

    VIDENT IAUTOMASTER PRO FUNCTIONS:

    OBDII / EOBD + CAN Functions.

    • Read Codes.
    • Erase Codes.
    • Vehicle Information.
    • Real Time Data.
    • View Freeze Frame Data.
    • I / M Readiness.
    • O2 Monitor Test – On- Board Monitor Test – Components / Active Test.
    • Modules Present.
    • Adaptation.

    All Systems Namely: Engine, Transmission, ABS, SRS, Instrument Panel, Steering Angle, Brake, Seat Memory, Air Conditioning Control, BCM, HVAC, Among Others.

    VIDENT IAUTOMASTER Pro special functions

    SPECIAL FEATURES:

    1. Oil Light Service / Reset.
    2. EPB (Electronic Parking Brake)
    3. BRT (Battery Configuration)
    4. DPF (Diesel Particulate Filter Regeneration)
    5. SAS (Steering Angle Sensor Reset)
    6. TBA / TPS (Throttle Body Alignment)
    7. Injector Coding.
    8. ABS Bleed
    9. Replace Airbag ECU.
    10. Suspension Match.
    11. EGR (Exhaust Gas Recirculation) Adaptation.
    12. Dash Language Change.
    13. AFS (System Adaptive Front Lighting)
    14. TPMS (Tire Pressure Sensor Reset)
    15. Turbo Match.
    16. Gear Learning.
    17. Immobilizer Programming.
    18. Gearbox Match.
    19. Sunroof Initialization.
    20. Odometer.
    21. AF (Adjust Fuel)
    22. Clutch Adapt.
    23. Seat Match.
    24. Prime Fuel Pump (PFP)
    25. Door Window Calibration.
    26. AT Adapt.
    27. Change Tire Size.
    28. EVAP Test (SMOG)
    29. TCM OIL.

    VEHICLE COVERAGE:

    • Europe: ABARTH, ALFA ROMEO, ASTON MARTIN, AUDI, BENTLEY, BMW, BUGATTI, CITROEN, DACIA, FERRARI, FIAT, FORD EU, JAGUAR, LAMBORGHINI, LANCIA, LAND ROVER, MASERATI, MAYBACH, MERCEDES BENZ, MINI, OPEL, PEUGEOT, PORSCHE, RENAULT, ROLLS-ROYCE,SAAB, SEAT, SKODA, SMART, SPRINTER, VAUXHALL, VOLKSWAGEN, VOLKSWAGEN_CV, VOLVO.
    • Asia: ACURA, DAEWOO, HONDA, HYUNDAI, INFINITI, ISUZU, KIA, LEXUS, MAZDA, MITSUBISHI, NISSAN, SCION, SUBARU, SUZUKI, SSANGYONG, TOYOTA.
    • America: CHRYSLER, JEEP, FORD, LINCOLN, MERCURY, BUICK, CADILLAC, CHEVROLET, GMC.
    • China: BORGWARD, BRILLIANCE, BYD, CHANGAN, CHANGHE, CHERY, DFXK, DFFG, EMGRAND, ENGLON, FAW DAIHATSU, FOTON, GEELY, GLEAGLE, GREAT WALL, JAC, JOYLONG, HAFEI, KARRY, LANDWIND, LIFAN, MAPLE, MG, RELY, ROEWN, RIICH, TJFAW.

    Supported Protocols:

    ISO15765 (CANBUS 11bit And 29bit TP16, TP20, UDS, FIAT CAN, VOLVO CAN), ISO14230 (KWP2000), ISO9141-2, J1850VPW, J1850PWM, KWP1281,
    KWP2089, KW81, KW82, ALDIL, DSII, DSII , LUCAS, MELCO, BENIX, ISO7800, SIMENMS_ISO1, SIMENMS_ISO2, MIT MODE1, MIT MODE2, Mitsubishi Negative Logic Protocol, Nissan Specific Protocol.

    SPECIFICATION:

    • Display: 4.3” Backlit, 480*272 TFT Color Screen.
    • Operating Temperature: 0 To 60°C (32 To 140°F)
    • Storage Temperature: -20 To 70°C (-4 To 158°F)
    • Power: 8 To 18 V Provided Via Vehicle.
    • Tool Dimensions: 212*117*47mm (L*W*H)

    IAUTOMASTER PRO KIT INCLUDES:

    • IAutomaster-Pro Main Unit.
    • Diagnostic Cable.
    • User Manual.
    • Memory Card.
    • Password Paper.
    • Card Reader.
    • Tool Case.

    VIDENT IAUTOMASTER Pro package list

  • R13,999.00

    Vident iSmart 800 Automotive Diagnostic & Analysis System

    Vident iSmart 800 is a windows tablet based scan tool featured with intuitive user interface, sophisticated diagnosis, wide vehicle coverage, advanced graphing, bi-directional component tests, component calibration, module coding and programming.

    Vident iSmart 800 Hardware Features

    iSmart 800 Hardware Features:

    1. 8″ high-resolution 1280*800 capacitive touch screen
    2. Front and rear built-in camera to save and share photo for your repair records.
    3. Wireless Bluetooth communication with vehicle.
    4. Dual band WIFI to access your favorite web resources.
    5. Built-in rechargeable Li-polymer battery for up to 6 hours of continuous operation.
    6. USB,audio,HDMI and auxiliary ports make it easy to connect accessories.
    7. Secure,solid-state 32GB hard drive and a Intel Quad-core processor.
    8. TF card slot for extensive memory.

    Vident iSmart 800 Software Features:

    1. Complete capabilities for code, live data, freeze frame, functional tests, ECU information, adaption, matching and coding of dozens of vehicle system.
    2. OEM-specific coverage for over 78 American, European and Asian makes from 1996 to 2019.
    3. Automatic VIN identification for easy vehicle communication.
    4. System Detection-detects only the systems that are specific to your vehicle and reads for errors, meaning you haven’t got to spend time looking through data that might not be relevant.
    5. One-touch vehicle code Auto scan and clear quickly checks and clears codes for all available modules on the vehicle.
    6. Study and compare mode of Live data-real-time data can be compared against known good measurements.
    7. Direct Access to the most common required special functionalities: BCM/SIR setting, Oil Light Service, EPB Functions, Battery Configuration, ABS bleeding, DPF functions, TBA/TPS(Throttle Body Alignment),Steering Angle Sensor Calibration, TPMS, IMMO, Injector coding, Gear learning, Suspension Match, Sunroof Initialization, Gearbox Match, etc.
    8. Comprehensive data manager that can store thousands of vehicle records, customer data, vehicle IDs, fault codes, repair notes and diagnostic results.
    9. Interactive Data Logging sessions and remote control enable direct contact with Vident Technical.
    10. Support for first-hand bugs troubleshooting.
    11. High compatibility windows operation system for more applications namely oscilloscope, video scope, OE technical data.
    12. 3 year free diagnostic software update

    Vident iSmart 800 Software Features 1 Vident iSmart 800 Software Features 2

    Specifications:

    Operating System:                Windows 10
    Processor:                             Intel Z8350
    Memory:                                 2 GB RAM & 32 GB ROM
    Display:                                  8.0″ 1920*1200 IPS LCD touch screen
    Connectivity:                         802.11b/g/n+B/T/N; 2.4G+5.8G dual band WIFI, Bluetooth 4.0,
    USB Interface:                       USB 2.0*
    HDMI:                                     Micro HDMI×1
    SD/TF interface                     TF
    Headset                                  3.5MM×1
    Horn                                       Double horn
    Storage Extend                     128GB SD/TF
    Charging interface                DC2.5MM
    Touch screen                        support
    G-sensor                               support
    Camera      Front:                  2.0MP, with indicator light
    Audio Output/Input:              3.5mm standard earphone jack; output resistance2.2kΩ
    Power and Battery                3.7V/4500mAh polymer li-ion battery
    Input Voltage                         DC/12 V (9-35 V)
    Operating Temperature       -10 to 50°C (14 to 131°F)
    Storage Temperature           -30 to 70°C (-4 to 158°F)
    Dimensions (W x H x D)       226mm(8.89”)*155mm(6.1”) *16.5mm(0.65”)
    Weight of Kit                         2.9kg (basic )

    Basic Kit Includes

    • Mercedes Benz 38pin Adapter
    • BMW 20pin Adapter
    • AC/DC Adapter
    • OBDII Adapter
    • Diagnostic Cable
    • User Manual
    • CD
    • Carrying case

    Vident iSmart 800 Basic Package

  • R20,999.00

    VIDENT iSmart 900 Diagnostic & Analysis All System + Coding (78+ Makes) Wifi / Bluetooth Automotive Diagnostic Scanner

    The Vident iSmart 900 is an advanced diagnostic scan tool for workshops, mechanics and dealers. Delivering professional and speedy diagnosis on over 78 American, European and Asian makes from 1996 to 2017.

    VIDENT iSmart 900 Advanced Functions

    Vident iSmart 900 is a IP65 rated windows tablet based scan tool featured with intuitive user interface, sophisticated diagnosis, wide vehicle coverage, advanced graphing, bi-directional component tests, component calibration, module coding and programming. It utilizes a 8“ high resolution IPS LCD touch screen (1280 x 800). A secure solid-state 32GB hard drive and a Intel Quad-core processor that delivers boot-up less than 30 seconds. The multitask-capable windows 10 Operating System to offer you the best intuitive user interface and user-customizable configuration. With an unusual combination of sophistication and simple operation, iSmart 900 is suited to any tech—from rookies to seasoned diagnostic specialists.

    VIDENT iSmart 900 Automotive Diagnostic & Analysis System Win 10 IP65 8inch Wifi / Bluetooth Automotive Diagnostic Tool
    VIDENT iSmart 900 Display

    1. Scan Button –(Scanning is not available on this device).
    2. Lock/Power Button –Turns the device on & off with long press, or locks the screen
      with short press
    3. Volume Up
    4. Volume Down
    5. Front-Facing Camera
    6. Headset jack
    7. HDMI (high-definition multimedia interface) Port
    8. Micro USB port
    9. USB 2.0 port
    10. SIM card tray
    11. TF card tray
    12. DC/AC power jack

    VIDENT iSmart 900 Hardware Features:

    • 1.8″ high-resolution 1280×800 capacitive touch screen for a detailed view
    • 2.IP65 Rated tablet – shock-resistance, waterproof and dirtproof
    • 3.Front and rear built-in camera to save and share photos for your repair records
    • 4.Wireless Bluetooth® communication with vehicles within up to 70~100meters working range
    • 5.Dual band WIFI to access your favorite web resources
    • 6.Built-in rechargeable lithium-ion battery for up to 10 hours of continuous operation
    • 7.USB, audio, HDMI and auxiliary ports make it easy to connect accessories
    • 8.Secure, solid-state 32GB hard drive and a Intel Quad-core processor
    • 9.Built-in 3G SIM card slot allowing internet access even on the move
    • 10.With GPS Location module
    • 11.TF card slot for extensive memory

    VIDENT iSmart 900 Hardware Features

    VIDENT iSmart 900 Software Features:

    1. Multi-system Diagnosis–for most (if not all) electronically controlled systems, including Engine, ABS, Airbag, Automatic Transmission, Immobilizer, Climate Control, Fuel Pump Control module, Fuel Injection Control module, All-wheel drive control , VG transfer case module, Electronic selector module, body control module, digital radio, standard radio, drivers door module, HVAC, instrument cluster, seat memory module, theft deterrent, Amplifier, central gateway, immobilizer, overhead control panel, steering column module, convertible top controller, etc.
    2. OEM-specific coverage for over 78 American, European and Asian makes from 1996 to 2017
    3. Automatic VIN identification for easy vehicle communication
    4. System Detection – detects only the systems that are specific to your vehicle and reads for errors, meaning you haven’t got to spend time looking through data that might not be relevant
    5. One-Touch Full Vehicle Code Scan & Clear quickly checks and clears codes for all available modules on the vehicle
    6. Ability to record all available live data parameters and graph any four on screen at once
    7. Study and compare mode of Live data — real-time data can be compared against known good measurements
    8. Direct Access to the most common required special functionalities such as oil service, EPB, ABS & SRS, BCM/SIR setting, DPF regeneration, throttle body alignment, steering angle sensor calibration, battery configuration, etc.
    9. Comprehensive data manager that can store thousands of vehicle records, customer data, vehicle IDs, fault codes, repair notes and diagnostic results
    10. Multi-lingual menus and code definitions for an international marketplace. Support English, Spanish, Portuguese, Dutch, German, French, Swedish, Italian, Polish, Hungarian, Japanese, Korean, etc.
    11. Interactive Data Logging sessions and remote control enable direct contact with Vident Technical Support for first-hand bugs troubleshooting
    12. High compatibility windows operation system for more applications namely oscilloscope, video scope, OE technical data.
    13. Three year free diagnostic software update

    VIDENT iSmart 900 Vehicle Coverage:

    Chrysler, Ford, GM, Brazilian GM(For Brazilian Market Only)
    Au Ford (For Australian Market Only), Acura, Daewoo, Honda, Holden (For Australian Market Only), Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Scion, Subaru, Suzuki, Ssangyong, Tata, Toyota
    Abarth, Alfa-Romeo, Aston Martin, Audi, Bentley, BMW, Bugatti, Citroen, Dacia, Fiat, EU Ford, Jaguar, Land Rover, Lancia, Lamborghini, Maserati, Maybach, Mercedes Benz, Mini, Opel, Porsche, Peugeot, Renault,Rolls-Royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, Volkswagen
    BRILLIANCE, BYD, CHANGAN, CHANGHEAUTO, CHERY, CHERY_NE, EMGRAND, ENGLON, FOTON, GEELY, GLEAGLE, GREATWALL, KARRY, LIFAN, MAPLE, RELY,RIIC

    Package includes:

    • Main Unit
    • Mercedes Benz 38pin Adapter
    • Mazda 17pin Adapter
    • PSA 2pin Adapter
    • Audi 4pin Adapter
    • Fiat 3pin Adapter
    • OBDII Adapter
    • GM/Daewoo 12pin Adapter
    • AC/DC Power Adapter (12V)
    • BMW 20pin Adapter
    • Diagnostic Cable
    • Kia 20pin Adapter
    • Mitsubishi/Hyundai 12+16pin Adapter
    • Nissan 14pin Adapter
    • Honda 3pin Adapter
    • Toyota 17pin Adapter
    • Toyota 22pin Adapter
    • Clip Cable
    • User Manual (In English)
    • Carrying Case
    • CD
    • Cigarette Lighter

    VIDENT iSmart 900 Package List