Menu Close

Showing 49–52 of 52 results

  • EUCLEIA TabScan S8 Pro Auto Diagnostic System

    R52,999.00

    EUCLEIA TabScan S8 Pro Automotive Intelligent Dual-mode Diagnostic System

    EUCLEIA TabScan S8 Pro is powered by Eucleia’s lightning fast quad-core processor with innovative DolP technology that achieves 100M high-speed diagnostic communication.

    The combination of the S8 tablet and the T6 Pro VCI runs faster than any other diagnostic devices, offering more comprehensive, deeper and newer DoIP diagnosis.

    For more Eucleia products please view the following link: https://www.cardiagnosticsa.co.za/?s=eucleia

    EUCLEIA TabScan S8 Pro 1

    Free Update Online for 18 Months on the official Eucleia website: http://www.eucleiatech.com

    EUCLEIA TabScan S8 Pro Function:

    1. Full system diagnosis

    Eucleia Tabscan S8 Pro can support the following control unit diagnosis, which is including the following module diagnosis for example,

    1. Engine control module trouble codes reading and clearing
    2. Transmission module trouble codes reading and clearing
    3. Brakes trouble codes reading and clearing
    4. Air conditioning trouble codes reading and clearing
    5. Central electrics trouble codes reading and clearing
    6. Radio tuner trouble codes reading and clearing
    7. Parking assistance trouble codes reading and clearing
    8. ABS trouble codes reading and clearing
    9. SRS airbag trouble codes reading and clearing
    10. Immobilizer trouble codes reading and clearing
    11. Main body trouble codes reading and clearing
    12. Navigation system trouble codes reading and clearing etc.

    EUCLEIA TabScan S8 Support Language:

    Supports Hot function / Special function in diagnostic category which is including:

    ABS Bleeding support:

    The auto bleed procedure is used on brake pump equipped vehicles.

    This procedure uses a scan tool to cycle the system solenoid valves etc.

    EPB Reset:

    It is important in the maintenance of electronic braking system’s safety and efficiency.

    Open and close brake clip & pad and calibration new brake system.

    Oil Service Reset:

    Calculation of Engine Oil life system.

    CKP Learning:

    The scan tool monitors certain Camshaft position sensors signals to determine if all conditions are met.

    Throttle Reset:

    With Vehicle’s throttle position system sensor connected to the butterfly spindle.

    SAS Reset:

    Tabscan helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

    Immobilizer:

    S8 reads pin code from vehicle security immo system, mainly used to disable the lost vehicle keys and program a new replacement.

    DPF Reset:

    Specially works for Diesel Particulate Filter system with DPF regeneration,

    Allows the scan tool to evaluate the battery charge state.

    TPMS:

    Makes TPMS sensor in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.

    CVT Reset:

    On these CVT transmissions, the timing of the release and application of elements is controlled by the transmission control module.

    RCMM:

    Matching remote control manually through the tabscan.

    SRS Reset:

    Fetching SRS ECU information, reading DTCs from SRS system, clearing SRS system DTCs, turing off the SRS warning lights.

    EUCLEIA TabScan S8 Pro 2

    EUCLEIA Tabscan S8 Pro Supports Functions:

    OBD2 Functions:

    1. Action Test
    2. Read and Clear DTC Codes
    3. Display Live Data Stream in Graph
    4. Freeze Frame
    5. ECU information
    6. Turn off MIL Warning Light

    Support Car Models:

    Wiscan T6 Pro can supports following models:

    • Mercedes Benz (Xentry, DTS, Vediamo)
    • BMW (ISTAD, Esys, ISTAP, Winkwp)
    • Volkswagen (ODIS, ODISE)
    • Bentley (ODIS, ODISE)
    • Lamborghini (ODIS, ODISE)
    • Landrover, Jaguar (SDD, Pathfinder)
    • Porsche (PWIS3)
    • GM(GDS2DPS)
    • Toyota (GTS)
    • Honda(i-HDS)
    • Volvo (VIDA)
    • Ford (Forscan)
    • Mazda (Forscan)

    Eucleia Tabscan S8 Pro Package List:

    • Eucleia Tabscan S8 Pro Main Unit
    • Wiscan T6 Pro
    • adapter Fiat-3
    • Nissan-14
    • KIA-20
    • Honda-3
    • Honda-17
    • Mazda-17
    • BMW-20
    • Main Test cable
    • OBDII Adapter
    • T6 Pro USB Cable
    • Plastic case
    • User’s Manual

    EUCLEIA TabScan S8 Pro 4

    Add to cart
    R 20316.29 x 3
  • Sale!

    Autel MaxiIM IM608 Diagnosis IMMO & Key Programming

    R61,999.00

    AUTEL MAXIIM IM608 DIAGNOSIS IMMO KEY PROGRAMMING WITH XP400 AND J2534 ECU RE-PROGRAMMER NO IP LIMIT

    The Autel MaxiIM IM608 Is The Most Advanced And The Unique All In One Key Programming And Diagnostic Tool That Combines Advanced Key Programming, All Systems Diagnostics, And Advanced Services In One Android Based 10.1-Inch Touchscreen Tablet. It Is Equipped With XP400 Key Programmer And MaxiFlash ECU Programmer To Provide Complete Coverage Of IMMO And Programming Functions. Together With The Ability To Quickly Diagnose All Modules Of The Majority Of The Makes And Models On The Market, IM608 Provides You With All Special Functions. It Is The Unprecedented Key Programming And Diagnostic Tool That You Ever Wanted.

    All Autel Products Link: Https://Www.Diatools.Co.Za/Brand/Autel/

     

    AUTEL IM608 HIGHLIGHTS:

    1. Diagnosis Language: Default Language Is English, Can Be Changed Language To German, Swidish, Italian, Portuguese, French, Etc (Provide Your Device S/N To Change Language)
      IMMO Language: English.
    2. Free Update Online For 1 Year, Updates Via Official Website Autel Im608 Update Service
    3. Warranty For 12 Months.
    4. ADVANCED IMMO & KEY PROGRAMMING.
    5. OE-Level Diagnostic And Service Functions As MaxiSYS Pro.
    6. Professional Key Programming Equipped With XP400 Key Programmer And MaxiFlash ECU Programmer For Complete Immo Coverage.
    7. NO IP Blocking Problem, Can Be Used In All EU Countries.

    Autel MaxiIM IM608 Is A State Of The Art 10-Inch Android-Based Touchscreen Tablet Combining The Most Advanced Key Programming And Immobilizer Capabilities With OE-Level Diagnostics And Service Functions. Equipped With XP400 Key Programmer And MaxiFlash JVCI ECU Programmer, IM608 Is A Comprehensive Immobilizer And Key Programming Tool And Ideal For Auto Technicians And Locksmiths.

    AUTEL MAXIIM IM608 FEATURES:

    The IM608 Is An OE-Level Diagnostic And Service Functions As MaxiSYS Pro With Additional Software And Accessories For IMMO And Key Programming.

    1. Extraordinarily Powerful Cortex A7+A15 Six-Core Processor.
    2. 10.1-Inch LED Capacitive Touch Screen With 1920×1200 Resolution.
    3. Internal Reliable 64GB On-Board Memory For Better Performance.
    4. Built-In 8-Megapixel Rear Camera With Auto-Focus And Flashlight.
    5. 802.11 A/B/G/N/Ac Wi-Fi To Access Your Favorite Web Resources.
    6. Open Source Android Operating System For Fast Boot-Up And Multitasking.
    7. Powerful Combination Of Advanced Key Programming/All Systems Diagnostics/Advanced Maintenance Services.
    8. Professional Key Programming Equipped With XP400 Key Programmer And MaxiFlash ECU Programmer For Complete Immo Coverage.
    9. Smart Mode For Guided And Automated Key Learning.
    10. Expert Mode For Advanced Key Learning.
    11. Read PIN/CS (All Key Lost), Generate Key, Key Learning, Remote Learning.
    12. IMMO ECU Reset/Adaptation, Refresh/Coding.
    13. Read/Write Transponder Data, ECU/MCU/EEPROM Data (Eg. 9S12 Encryption Chip), IC Card, Detect Remote Frequency.
    14. Powerful OE Level Diagnostics For More Than 80 US, Asian And European Makes And Models.
    15. Complete Capabilities For Codes, Live Data, Active Test, ECU Information, Adaptation, Matching, Coding Etc.
    16. All Special Functions, EPB, DPF, SAS, Oil Reset, BMS, TPMS Sensor ID Relearn, Etc.

    AUTEL IM608 MAIN FUNCTIONS:

    • Read & Clear Fault Codes | Short Description & Code Provided (Can Clear Faults & Warning Lights)
    • Service Functions | Oil Light / EPB / BMS / SAS / DAF Etc.
    • Access Live Data | Data From The ECU/Modules/Sensors Displayed In Real-Time (Oxygen Sensor-Rich/Lean Etc)
    • Actuation/Component Testing | Actuate (Switch On/Off) To Diagnose Functionality (Relays, Fans, Locks Etc)
    • Coding Functions | Allows You To Change Vehicle Parts That Need To Be ‘Coded’ (Injectors, ABS, Starters Etc)
    • Flashing/Reprogramming | Advanced Updating/Coding Of ECU’s Online Through A J2534 Pass-Through Flashing Device.
    • Advanced Key Programming | IMMO Functions, Transponder Read/Write/Identify, MCU/EEPROM Chip Read/Write.

    Autel MaxiIM IM608 Advance key programmer

    MAXIIM IM608 IMMO FUNCTION:

    The IMMO Function Requires A Data Link To The IMMO Electronic Control System Of The Test Vehicle For Diagnosis Via OBD II Connection. The Function Retrieves Vehicle IMMO Information And Provides Smart Mode And Expert Mode To Guide Technicians Performing IMMO Related Functions, Including Key Learning, Remote Control Learning, Remote Control Add, Etc.

    There Are Two Options Available When Accessing The IMMO Section:

    Smart Mode: It Provides Guided Functions With Step-By-Step Instructions, Each Function Is Configured As A Smart Guide System. Once The Test Vehicle Is Identified, A Vehicle Profile Will Display, Select Yes To Continue.

    Expert Mode: It Provides Skilled Technicians A Convenient Way To Perform Individual IMMO Functions They Need. All The Function Options In This Mode Are Separated Segments. If Needed, Technicians Can Only Perform One Segment Function Instead Of A Whole Process Provided In Smart Mode.

    • PIN / CS Reading (Full Lost)
    • Key Generation.
    • Key Programming.
    • Command Introduction.
    • Backup / Repair IMMO Data.
    • IMMO ECU Brain Reset / Adaptation.
    • IMMO ECU Brain Reset / Coding.
    • BENZ 3rd Generation IMMO Key Splicing, Full Lost, Key Programming.
    • BMW FEM / BDC Key Programming And ECU Adaptation.
    • BMW CAS4 / 3/2 Key Programming.
    • VW / AUDI MQB Key Programming, 48 Transponder (96-Bit) Key Splicing, Full Lost, A6 Full Lost And More …

    XP400 SWITCH & CHIP PROGRAMMER:

    • PC Supported.
    • MCU / EEPROM Chip Read / Write.
    • ECU Read / Write.
    • MC9S12 Encrypted Chip Read / Write.
    • Key Reading / Writing.
    • Mercedes Infrared Key Reading / Writing.
    • Finding The Control Frequency.
    • IC Card Reading / Writing.

    Autel MaxiIM IM608 XP400 AND CHIP PROGRAMMER

    IM608 PROGRAMMING:

    The Programming Function Requires Connection Between The Tablet And The XP400, And No Vehicle Connection Is Required. The Programming Application Can Access The Key Chip, Read, Retrieve And Write Key Information, As Well As Other Key Related Functions.

    XP400: It Is Specially Designed To Read Transponder Data (Including Benz Infrared Smart Key), Clone And Generate Exclusive Keys, Read/Write On-Board EEPROM Data, And Read/Write Freescale 9S12 MCUs. By Working With Diagnostic Tool And PC That Are Both Loaded With Programmer Software, The XP400 Can Read/Write Transponder Data Quickly And Accurately.

    J2534 ECU Programming: It Is A SAE J2534-1 & -2 Compliant Pass Thru Reprogramming Interface Device. Using The Updated OEM Software, It Is Capable Of Replacing The Existing Software/Firmware In The Electronic Control Units (ECU), Programming New ECUs And Fixing Software-Controlled Drivability Issues And Emission Issues.

    NOTE: Don’t Use The Main Cable To Connect XP400 To The Vehicle’s DLC, Which May Damage The XP400 Main Board. Use The J2534 For Vehicle Connection With The Main Cable, The J2534 Can Be Connected To IM608 Via Bluetooth Or Usb Cable.

    OE- LEVEL DIAGNOSTIC FOR 80+ VEHICLE MAKES:

    • All System Diagnostics.
    • Auto Search / VIN Finding.
    • Reading / Deleting Error Code.
    • Viewing The Live Data Stream.
    • View Records Of Failure History.
    • Store And Data Management Applications.
    • MaxiFlash JVCI ECU Programmer (Bluetooth / USB Cable)

    Autel MaxiIM IM608 ALLY SYSTEMS DIAGNOSTIC

    MOST COMMONLY PERFORMED SERVICE FUNCTIONS:

    • ECU Coding.
    • Oil Reset Service: Reset Service Mileage And Service Intervals For The Engine Oil Life System.
    • SAS Service: Perform Calibration For The Steering Angle Sensor And Automatically Cleared The Fault Memory.
    • DPF Regeneration Service: Clear The Blockage Through Continuous Burning Of The Particulate Matter Captured In The DPF Filter.
    • EPB Service: Deactivate And Activate The Brake Control System, Assist With Brake Fluid Control, Open And Close Brake Pads And Set Brakes After Disc Or Pad Replacement, Etc.
    • BMS Service: Allow The Scan Tool To Evaluate The Battery Charge State, Monitor The Close-Circuit Current, Register The Battery Replacement, And Activate The Rest State Of The Vehicle.
    • TPMS Service: Quickly Look Up The Tire Sensor IDs From The Vehicle’s ECU, Perform TPMS Programming And Reset Procedures After Tire Sensors Are Replaced.

    Autel MaxiIM IM608 ECU PROGRAMMER

    Autel MaxiIM IM608 Specifications:

    • Operating System Android 4.4.2, KitKat.
    • Processor Samsung Exynos Hex-Core Processor (1.3GHz Quad-Core ARM Cortex-A7 + 1.7GHz Dual-Core ARM Cortex-A15)
    • Memory 2GB RAM & 64GB On-Board Memory.
    • Display 10.1-Inch LED Capacitive Touch Screen With 1920×1200 Resolution.
    • Connectivity Wi-Fi (802.11 A/B/G/N/Ac)
    • USB 2.0.
    • BT V.2.1 + EDR.
    • SD Card (Support Up To 32GB)
    • HDMI.
    • Camera (Rear) 8.0 Megapixel, AF With Flashlight.
    • Sensors Gravity Accelerometer, Ambient Light Sensor (ALS)
    • Audio Input/Output Microphone.
    • Dual Speakers.
    • 3-Band 3.5 Mm Stereo/Standard Headset Jack.
    • Power And Battery 15000 MAh 3.8 V Lithium-Polymer Battery.
    • Charging Via 12 V AC/DC Power Supply With The Temperature Between 0°C And 45°C.
    • Input Voltage 12 V (9-24 V)
    • Power Consumption 6.5 W.
    • Operating Temp. 0 To 50°C (32 To 122°F)
    • Storage Temp. -20 To 60°C (-4 To 140°F)
    • Dimensions (W X H X D) 300 Mm (11.81”) X 220.0 Mm (8.66”) X 50.0 Mm (1.97”)
    • Weight NW: 1.42 Kg (3.13 Lb.)
    • GW: 8.655 Kg (19.08 Lb.)
    • Protocols ISO9141-2, ISO14230-2,ISO15765-4, K/L-Line.
    • Flashing Code,SAE-J1850 VPW, SAE-J1850PWM.
    • CAN ISO11898, Highspeed, Middle Speed
    • Low Speed And Singlewire CAN,GM UART,UART.
    • Echo Byte Protocol, Honda Diag-H Protocol, TP2.0.
    • TP1.6SAE J1939, SAE J1708, Fault-Tolerant CAN.

    ESTABLISH VEHICLE COMMUNICATION FOR POWERFUL IMMO OPERATIONS:

    The IMMO Operations Require Connecting The MaxiIM IM608 Tablet To The Test Vehicle Through The MaxiFlash Using The Main Cable And The Included USB Cable (2m). To Establish Proper Vehicle Communication To The Tablet, You Need To Perform The Following Steps:

    1. Connect The MaxiFlash To The Vehicle’s DLC For Both Communication And Power Source.
    2. Connect The MaxiFlash To The Tablet Via BT Pairing, Or USB Connection.

    BT Pairing Is Recommended As The First Choice For The Communication Between The Tablet And The J2534 ECU Reprogrammer MaxiFlash JVCI. The Working Range For BT Communication Is About 210 Feet (70 M); This Means You Can Perform Key Programming And Vehicle Diagnosis Freely Around The Workshop With Greater Convenience.

    If You Use More Than One MaxiFlash To Connect To The Test Vehicles When Customers Are Many, You Can Perform Key Programming And Vehicle Diagnosis On Various Vehicles Conveniently, By Pairing The Tablet Separately To Each Of The MaxiFlash Connected To The Different Test Vehicles, Via BT, Without The Need To Repeat The Plugging And Unplugging Procedure, Which Is Unavoidable Through Traditional Wired Connection, Thus Saves You More Time And Provides More Efficiency.

    AUTEL MAXIIM IM608 PACKLING LIST:

    • Autel MaxiIM IM608 Main Unit.
    • APC101 USB Cable.
    • APA101 Signal Cable.
    • MaxiFlash JVCI.
    • APB101+APD101(EEPROM Adaptor+EEPROM Adapter Shell)
    • APA103(EEPROM Clamp)
    • XP400.
    • APB102 MB IR Cable.
    • APA104 ECU Clamp.
    • Main Cable.
    • APB104(MCU_FQFP64)
    • APA105(MCU Clamp)
    • USB Cable (2m)
    • APB105 MCU_FQFP80.
    • APA106(MC9S12 Clamp)
    • Mini USB Cable.
    • APB106(MCU_FQFP144)
    • APA107(Connect Cable)
    • AC/DC 12V Adapter.
    • APB107(MCU_FQFP144)
    • Quick Reference Guide.
    • Light Fuse 6*30mm.
    • APB108(MCU_FQFP176)
    • Packing List.
    • Cigarette Lighter.
    • APA002(EEPROM Socket)
    • Carrying Case 634*170*404mm.
    • AAC001.

    Autel MaxiIM IM608 PACKAGE LIST

     

     

    Add to cart
    R 23766.29 x 3

  • LAUNCH X431 PAD III V2.0 Full System Diagnostic Tool

    R64,999.00

    Original LAUNCH X431 PAD III V2.0 Auto Diagnostic Tool with Blutooth/Wifi Support Coding and Programming

    The Launch X431 PAD III is a brand-new high-end car fault diagnostic device developed by Launch based on Android system. X431 PAD III is the only device in the X431 family which supports 140 car brands and more than 2000 car models. LAUNCH X431 PAD III is the only car scanner in the world which is built to IP65 water proof specifications, with dust proof design and which has passed droop test.

    All Launch products available can be viewed at: https://www.cardiagnosticsa.co.za/?s=launch

    LAUNCH X431 PAD III 1

    LAUNCH X431 PAD III Highlights:

    1. Free Update Online for 3 Years on Launch Official Website http://www.launchtech.com
    2. Intelligent Diagnosis: Identify the car model by VIN scanning and check historical maintenance and diagnostic records online
    3. Wide Car Model Coverage: Support most of the car models from Asia, Europe and America, such as Maserati, Ferrari, Rolls-Royce, Bentley, Benz, BMW, and Audi etc
    4. Support almost all OBD I and OBD II protocol
    5. Extended Functions: Support the modules “Sensor and multimeter”, Battery detection”, “Oscilloscope”, and “Endoscope”
    6. Scan 12V car and 24V Truck and Bus with the help of Launch HD Module
    7. LAUNCH X431 PAD3 is the only car scanner in the world which is built to IP65 water proof specifications, with dust proof design and which has passed droop test.
    8. Support Multi-language.

    LAUNCH X431 PAD III 2

    Launch X431 PAD III Supported CAR Brands:

    EUROPEAN: Alfa Romeo, Audi, BMW, Citroen, Euro Ford, Fiat, Land Rover, Mercedes Benz, Opel, Peugeot, Porsche, Renault, Rover, SAAB, Seat, Mini, Skoda, Smart, Jaguar, Transporter V Class, Volvo, VW.

    ASIAN: Maruti, Mahindra, TATA, Hyundai, Daewoo, Daihatsu, Honda, Kia, Lexus, Mazda, Mitsubishi, Nissan, Proton, Sangyong, Subaru, Suzuki, Toyota.

    AMERICAN: Chrysler Ford, GM, Work Horse, Chevrolet, Pontiac, Buick, Cadillac, Saban, GMH Truck, Hummer, Ford F Series Trucks, Lincoln, Mariner Hybrid, Mustang, Montego, Ford Motor Home Range, Taurus.

    PROTOCOLS:  OBDII, EOBDII, EOBDIICANBUS.

    LAUNCH X431 PADIII supported function:

    LAUNCH X431 PAD3 is the only car scanner in the world which is built to IP65 water proof specifications, with dust proof design and which has passed droop test.

    • Read and clear trouble code.
    • Support data stream and actuation test/component testing.
    • ECU/ECM programming.
    • Battery registration.
    • Injector coding.
    • KEY coding for Maruti Suzuki (up to 2013), TATA and HONDA (Note: KEY coding is not available for Mahindra car).
    • Immobilizer trouble code reading.
    • Service light reset for BMW, AUDI, Benz, VW, Skoda and many more.
    • A.B.S(anti-lock brake) function.
    • E.P.S(Electric Power Steering) function.
    • Air bag function.
    • Steering angle sensor reset.
    • car A.C(air conditioning system)
    • ECM/PCM reset.
    • Automatic Transmission function.
    • B.C.M(Body Control Module) including seat belt, Central locking, Light.
    • Adaptation for almost all car.
    • Scan radio system.
    • Online Coding Available for Euro car brands.
    • Special Functions.

    Support 15 special functions including: Oil Reset, Throttle Adaptation, Steering Angle Reset, Electrical Parking Brake Reset, Tire Pressure. Reset, Anti-theft Matching, ABS Blake Bleeding, Battery Matching, Gear Learning, Injector programming, DPF Reset, Sunroof Initialization. Headlamp Matching, Suspension Matching and AT Matching.

    LAUNCH X431 PAD III Features:

    1. 10.1 High Resolution Captive Screen, 8 Core Processor, 2 GB RAM + 64 GB ROM.
    2. High resolution camera with still and video capabilities (Front and Rear Camera)
    3. Featuring an open Android operating system for a true tablet experience install third party apps and software
    4. Bluetooth VCI with high performance data refresh
    5. Auto-ID available on all vehicle systems and modules
    6. Graphs Live Data Stream
    7. Dual Charging Indicator
    8. OE-Level access to Asian, European, and Domestic applications for module coding, resets, relearns, and bi-directional capabilities
    9. Now Featuring a back Kickstand for lightweight and functional support
    10. Support online technician’s community where problem can be shared and solutions for that problem can be answered by expert from that field
    11. Can support multi graph display of up to 15 graphs at a time which is one of the largest graphs displays in any LAUNCH scanner till date
    12. User can search error code online from device itself and can find solution for particular problem

    Extension module for PAD III

    1). Sensor box: (Optional) A sensor box is used along with x431 PAD IIl to test most of sensor like MAP sensor, MAF sensor, TP sensor, Oxygen sensor, CAM sensor, Temperature sensor and many more

    2). Multi-meter: An inbuilt multi meter used along with sensor box to test output of most of sensors.

    3). Battery box (Optional) A battery box used to test 12V battery for almost all cars. Battery box is also capable of testing alternator and starter.

    4). Oscilloscope (Optional) A device is used along with LAUNCH X431 to test electronic circuit.

    5). Video scope (Optional) A device which can reach to a place where even our eyes cannot reach. Video scope along with X431 PAD2 can make repairing job of technician very simple and easy.

    6). X-431 HD Module (Optional) With help of LAUNCH X431 HD Module, X431 PAD II can even scan commercial and 12V vehicle.

    X-431 PAD III V2.0 Handset VCI (Vehicle Communication Interface)

    The handset acts as the central processing system, which is used to receive and analyze the live vehicle data from the VCI connector and then output the test result.
    LAUNCH X431 PAD III 3

    VCI (Vehicle Communication Interface)

    The VCI connector works as a vehicle communication interface device, which is used to connect to the vehicle’s DLC (Data Link Connector) socket directly or via OBD II extension cable to read the vehicle data and then send it to the handset via wireless (BT) communication only works with the vehicle with 12V battery voltage.

    1. Locate vehicle’s DLC socket:

    The DLC (Data Link Connector) is typically a 16-pin connector where diagnostic code readers interface with the vehicle’s on-board computer.

    It is usually located on driver’s side, about 12 inches away from the center of dashboard. See Figure DLC Location.

    2. Plug the VCI connector into the vehicle’s DLC (It is suggested to use the OBD II extension cable to connect the DLC and the VCI). Normally the power indicator of the VCI will light up.

    Specification:

    X-431 PAD III Parameters VC Module Parameters
    Display Screen: 10.1″ IPS touchscreen 1920×1200 resolution
    Operation System: Android 5.1
    CPU: 8-Core Processor, 2GHz
    RAM: 2GB
    ROM: 64GB
    Sensor: Gravity accelerometer
    Camera: 2MP front-facing camera / 8MP rear-facing camera
    Power and Battery: 1500mAh lithium-polymer battery
    Connectivity: Wi-Fi, USB 2.0, Bluetooth 2.0 and above
    Audio Input / Output: Microphone, Speakers, 3.5mm stereo head jack
    Operating Temperature: -10 °C to 50 °C
    Environment Temperature: -20 °C to 70 °C    		 Working Temperature: -10 ℃ to 50℃
    Power Consumption: ≤2W
    Test Voltage: DC12V
    Diagnostic Method: Bluetooth +Wire

    LAUNCH X431 PAD III Package List:

    • X-431 PAD III Display Tablet
    • VC Module
    • Power Adapter for X-431 PAD III
    • Type A to B Cable
    • Diagnostic Cable
    • Power Adapter for VCI Module
    • Cigarette Lighter Cable
    • Battery Clamps Cable
    • In / Out Cable
    • Password Envelope
    • Non-16pin Adapter Cable

    LAUNCH X431 PAD III 6

     

    Add to cart
    R 24916.29 x 3

  • Autel MaxiSys MS919 Diagnostic Tool ECU Programmer

    R71,999.00

    AUTEL MAXISYS MS919 ULTRA ADVANCED ECU PROGRAMMER AUTO DIAGNOSTIC TOOL.

    The Autel MaxiSys MS919 Features A 10-Inch Touchscreen Tablet With Android 7.0 OS Powered By An Octa-Core Processor (2.3GHz Quad + 1.7GHz Quad), Substantial 128GB Built-In Memory To Provide Diagnostic Guidance And Test Components To Confirm Repairs. The New MaxiFlash VCMI, Functions As A 4-Channel Oscilloscope, Waveform Generator, Multimeter, And CAN BUS Tester. The Supporting MS919 Software Provides A Large Library Of Preset Guided Tests And Extensive Waveform Library, To Ensure Techs Are Getting The Most Oscilloscope Use. The MS919 Software Outperforms Competitors By Offering DTC And Sensor Specific Test Options To Help Test More Accurately, As Well As Providing Probe And Component Location Diagrams So Technicians Test While Connected Correctly.

    ALL AUTEL PRODUCTS LINK: https://www.cardiagnosticsa.co.za/brand/autel/

    Autel MaxiSys MS919 Auto Diagnostic Tool

    AUTEL MAXISYS MS919 FEATURES:

    1. Autel Updates Provide Latest OE Level Coverage For Over 80 US Domestic, Asian And European Vehicles, Including Supercar.
    2. Exceptional OE-Level Functionality From Comprehensive OBDII Diagnostics & Services To Advanced ECU Coding And Programming.
    3. Automatic System And Software Updates With Real-Time Push Message Notifications Via Official Website: Http://Www.Auteltech.Com/
    4. Interactive Data Logging Sessions Enable Direct Contact With Autel Support For First-Hand Troubleshooting Of Diagnostic Bugs And Error.
    5. One-Stop Multitasking Designed For Ideal Management Of Workshop Operations To Keep All Data Files, Customer Info, And Vehicle Records Well Organized.
    6. Cloud-Based Data Manager Saves Customer And Vehicle Records, Scanner Data And Technician Notes.
    7. MaxiFlash VCMI Included.
    8. Built-In Oscilloscope.
    9. With Built-In Waveform Generator.
    10. Built-In Multimeter.
    11. Built-In CAN Bus Check.

    Autel MaxiSys MS919 All system

    The MaxiSys 919 Incorporates Diagnostics, Solution, Considerable Live Data, Network Coding, And ECU Re-Flashing. The MS919 Has MaxiFLASH VCMI With An Integrated Oscilloscope, Multimeter, Signal Generator, And Also OBD Bus Examine Features, And Links To The Ultra Utilizing Wi-Fi, So Significantly Raising The Communication Speeds. The All-New VCMI Additionally Has Actually Enhanced Protocol Compatibility And Sustains D-PDU, RP1210, CANFD. J2534 And DoIP Procedures.

    The Autel MaxiSys MS919 Has All New Software Professional Abilities That We Have Named Repair Assistance, DTC Analysis, Topology Mapping, And Relevant Cases.

    Autel MaxiSys MS919 advanced vehicle coverage

    SUPPORTED PROTOCOLS:

    • DoIP, PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 Single Wire Can(GMLAN), ISO-11897-2, ISO-11897-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO-14230, SAE-J2610 (Chysler SCI), UART Echo Byte, SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART With Clock, BMW DS2, BMW DS1, SAE J2819 (VAG KW81), KW82, SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2).

    Autel MaxiSys MS919 special service functions

    OSCILLOSCOPE;

    • The 4 Channel Oscilloscope Of MaxiSys MS919 Is Faster With 20MHz Bandwidth, More Accurate With 80MS/S Sampling Data Rate, And A 32M Memory Buffer That Stores More Complex Signals, Zoom And Replay.

    • MaxiSys MS919 Pre-Set Guided Test And Waveform Library Instructs Technician’s On Use And Fault Analysis We Also Provide A Large Number Of Cloud Preset Cases, Including Connection Diagrams, Waveform Library, Reference Waveforms, Fault Case Analysis And One-Press Waveform Settings.

    • Waveform Generator – The Waveform Generator Of MaxiSys MS919 Is Used To Test A Sensor, An Actuator, Or An ECU Without The Need To Replace Them One By One To Identify The Fault. This Is Done By Simulating Signals Of Various Sensors And ECUs, Identifying Hardware Issues.
    • Simulates Sensor Signals To Quickly Diagnose ECU, Sensor, And Wiring Harness Issues;
    • It Simulates ECU Signals To Perform Active Tests To Verify Functions Of Certain Parts (Electronic Fan, Solenoid Valves Etc);
    • Simulates Actuator Signals And Verifies The Communication Status Between The Actuator And ECU (Electronic Fan, Solenoid Valve, Headlight)

    • Multimeter – The Professional Multimeter Will Measure Voltage, Current, Resistance, Diode, Frequency/Period, Duty Cycle, Connectivity And Pulse Width.
    • CAN Bus Check – The CAN Bus Check Of MaxiSys MS919 Can Quickly Determine Whether The OBD Pins Are Functioning Correctly.
    • J2534, DoIP Bus, CAN-FD Bus, RP1210 And D-PDU – The Autel VCMI Supplied With The Ultra And MS919 Supports All The Very Latest Communication And Application Programming Interface Protocols.

    SYSTEM TOPOLOGY:

    • With Our Autel Exclusive System Topology Software, The Technician Can See A Color Coded Topology Display For All Vehicle Systems And Their Status On One Page!
    • The Display Shows The Structure Of Communication Between Modules, And Gives The Ability To Press On A System Module To Display Any DTC’s And Access The System.
    • Currently Available On BMW, Ford, Volkswagen, Audi, GM, Ford, Chrysler, Nissan, Honda, Toyota Lexus, Jaguar, Land Rover, Mercedes Benz, Hyundai, Kia, Volvo.
    • Repair Assistant – MaxiSys MS919 Repair Assist Software Displays A List Of Recommended Tests, The Completion Status And Priority For Undertaking. Very Simply, The Higher The Priority, The Earlier The Components Should Be Tested.
    • Prioritization – The Best Solution Path Is Given In Priority Via Automatic Sorting.
    • Guided Maintenance – An Integrated Troubleshooting Process Organized Into The Operation Steps, That Guide The User To Solve The Maintenance Problems.
    • Accurate Recommendation – Automatically Match The Circuit Diagram And Pin Position Required For The Fault.
    • In The Case Of Multiple Inspection Steps, You Can Carry Out The Inspection Step By Step, Or Skip Unnecessary Steps.
    • Currently Available On BMW, JLR, GM, Ford, Chrysler And Porsche.

    • Relevant Cases – The Software Automatically Recommends Repair Processes That May Be Relevant To The Vehicle And Fault. These Repair Cases/Suggestions Provide The Technician With Great Insight When Diagnosing And Repairing Vehicle Faults.
    • Tech Services Bulletins – See Official Announcements Issued By Vehicle Manufacturers Regarding Common Problems Including Vehicle Modules, DTCs, Repair Methods, Program Updates And Recall Strategies. Currently Available On Ford, GM, FCA, Toyota, Lexus, VW, Nissan, Honda, BMW, Mercedes, Audi, Hyundai, Kia.
    • DTC Analysis – The DTC Analysis Describes Possible Causes And Solutions For Vehicle Faults. Currently Available On GM, Ford, Toyota, Lexus, Nissan, Honda, VW, Audi, BMW, FCA, Mercedes.

    AUTEL MAXISYS MS919 SPECIFICATIONS:

    • Operating System: Android 7.0
    • Processor: Samsung Exynos8895V Octa-Core Processor (2.3GHz Quad-Core Mongoose + 1.7GHz Quad-Core A53)
    • Memory: 4GB RAM & 128GB On-Board Memory
    • Display: 9.7 Inch TFT-LCD With 1536 X 2048 Resolution & Capacitive Touchscreen
    • Connectivity: Wi-Fix2 (802.11 A/B/G/N/Ac 2×2 MIMO); BT V.2.1 + EDR; GPS; USB 2.0 (TWO USB HOST Type A, ONE USB Mini Device); HDMI 2.0; SD Card (Support Up To 256GB)
    • Camera (Rear): Rear: 16 Megapixel, Autofocus With Flashlight; Front: 5.0 Megapixel
    • Sensors: Gravity Accelerometer, Ambient Light Sensor (ALS)
    • Audio Input/Output: Microphone; Dual Speakers; 3-Band 3.5 Mm Stereo/Standard Headset Jack
    • Power And Battery: 15000mAh 3.8V Lithium-Polymer Battery; Charging Via 12V AC/DC Power Supply With The Temperature Between 0°C And 45°C
    • Input Voltage: 12V/3A Adapter
    • Operating Temperature: 0 To 50°C (32 To 122°F)
    • Storage Temperature: -20 To 60°C (-4 To 140°F)
    • Dimensions: (WxHxD) 304.4 Mm (11.98″) X 227.8 Mm (8.97″) X 42.5 Mm (1.67″)
    • Weight: 1.66kg (3.66lb.)

    MAXISYS MS919 PACKAGE LIST:

    • MaxiSys MS919.
    • MaxiFlash VCMI.
    • Main Cable V2.0
    • USB 2.0 Cable V2.
    • AC/DC Adapter (12V)
    • Scope Test Lead (4pcs)
    • Multimeter Test Lead (2pcs)
    • Secondary Ignitation Pickup (2pcs)
    • Attenuator 20:1 (2pcs)
    • Breakout Lead (4x6pcs)
    • Multimeter Probe (1x2pcs)
    • Flexible Back-Pinning Probe (2x2pcs)
    • Back-Pinning Probe (1x5pcs)
    • Probe Screw(2pcs) Back-Pinning.
    • Back-Pinning Probe Replacement Needle (20pcs)
    • Small Crocodile Clip (2x2pcs)
    • Large Dolphin Clip (1x2pcs)
    • Cigarette Lighter.
    • Light Fuse (2pcs)
    • Clipper Cable.
    • Quick Reference Guide.
    • Carrying Case.

    Autel MaxiSys MS919 package list

     

    Add to cart
    R 27599.63 x 3